0
0

Redding Competition Bushing Neck Sizer Die .24 Nosler

UPC: 611760563201

$119.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is the single Competition Bushing Neck Sizer Die for the .24 Nosler, the same die Redding builds for handloaders who take their neck tension seriously. Instead of relying on an expander button to work the inside of the neck, this die uses an interchangeable bushing that sizes the outside of the neck to whatever dimension you choose. The result is minimal neck and bullet runout, which is exactly what you want when you're chasing tight groups.

The magic is in how the case is handled. The cartridge gets fully supported and aligned inside a tightly chambered sliding sleeve before sizing even starts, and it stays captured in that sleeve as it moves upward. The resizing bushing then self-centers on the case neck, so everything lines up on its own rather than fighting the case into alignment. The decapping rod is held in line by the internal parts of the die, working much like a firing pin runs in a bolt, which keeps the whole operation straight and repeatable.

What Sets the .24 Nosler Competition Neck Die Apart

The micrometer adjustment head is the feature reloaders fall in love with. It's calibrated in .001 inch increments and lets you control exactly how much of the neck length gets sized, so partial neck sizing becomes easy to fine-tune and repeat. Dial back to a favorite setting any time and you'll land in the same spot.

Picking Bushings and Buttons for Your .24 Nosler Die

Bushings are sold separately so you can match neck tension to your brass and your bullet. For reference, the .24 Nosler runs a .243 bullet diameter and this die accepts bushings from roughly .259 up to .267. A good starting point is to measure the outside neck diameter of your loaded rounds and subtract about .001. This die was built for people who prep brass carefully and prefer to skip a sizing button, though Redding does offer a carbide size button kit separately if you decide you want one down the road.

If you shoot the .24 Nosler and want the kind of concentricity that shows up on target, this is the neck sizing die to reach for.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 56320
  • UPC: 611760563201
  • Caliber: .24 Nosler
  • Die Type: Competition Bushing Neck Sizer Die
  • Bullet Diameter: 0.243 in
  • Adjustment: Micrometer, calibrated in .001 in increments
  • Bushing Range: 0.259 in to 0.267 in
  • Bushings Included: No, sold separately
  • Thread Size: 7/8"-14
  • Standard Shellholder: #10 (sold separately)
  • Shipping Weight: 0.895 lb

What’s Included

  • Redding Competition Bushing Neck Sizer Die (.24 Nosler)
  • Standard decapping rod assembly
  • Lock ring

Frequently Asked Questions

Are neck sizing bushings included with the Competition Bushing Neck Sizer Die?

No, bushings are sold separately so you can match the exact neck tension you want for your brass and bullet. For the .24 Nosler this die accepts bushings in roughly the .259 to .267 range. A common approach is to measure the outside neck diameter of a loaded round and subtract about .001 to find your starting size.

Does this die need a sizing button?

It's designed to work without one. The die sizes the outside of the neck with the bushing, which is ideal for reloaders who have sorted or neck-turned their brass for uniform thickness. If you'd rather use a button, Redding offers a carbide size button kit separately for this die.

What makes the Competition version different from a standard bushing neck die?

The Competition die adds a tightly chambered sliding sleeve that captures and aligns the case before sizing begins, which keeps runout to a minimum. It also uses a micrometer head so you can precisely set and repeat how much of the neck length gets sized. Those two features are what make it a favorite for bench-rest and precision work.

Do I need any other dies to go with this one?

This is a neck sizer only, so for full case prep you'll typically pair it with a body die to resize the case body and bump the shoulder when needed. A standard #10 shellholder is also required and is sold separately. If you want the complete setup in one box, Redding offers the three-die Competition set that adds the body die and a competition seating die.

Additional information

UPC

611760563201

Manufacturer

Manufacturer Part Number

56320

Shipping Weight

0.895

Reviews

There are no reviews yet.

Be the first to review “Redding Competition Bushing Neck Sizer Die .24 Nosler”