0
0

Redding Competition Bushing Neck Die .308 Win – MPN 56155

UPC: 611760561559

$143.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've been chasing better concentricity and more uniform neck tension in your .308 Win loads, this is the die that gets you there. The Redding Competition Bushing Neck Die works much like Redding's Competition Seating Die, where the case is completely supported and aligned with the sizing bushing before any sizing even begins. As the ram comes up, the case stays cradled in a tightly chambered sliding sleeve while the bushing self-centers on the neck, so you're working the brass straight instead of pulling it off-center.

What Sets the Competition Bushing Neck Die Apart

The magic here is the interchangeable bushing system paired with a micrometer top. By swapping bushings you control exactly how much neck tension you're putting on the bullet, and the micrometer lets you set how far down the neck gets sized, whether that's the full length or just a portion of it. To pick the right bushing, measure the outside neck diameter of a loaded round and subtract about .001" to account for brass spring-back. Redding bushings run in .001" increments across a wide range, so you can fine-tune tension to your exact brass and bullet combo.

Built for Prepped .308 Win Brass

This die was designed for handloaders who meticulously prep their cases and would rather not drag a case over an expander button. The decapping rod rides in precise alignment using the die's internal parts as linear support, similar to how a firing pin is guided, which keeps everything true through the stroke. If you do want to run an expander, Redding offers carbide size button kits separately.

Fitment and Setup Notes

The die uses a standard 7/8"-14 thread and drops into most common reloading presses. Keep in mind that bushings and shellholders are sold separately, so you'll want to grab the correct bushing size for your brass before your first session. For .308 Win, Redding lists a competition shellholder as well if you're building out a full precision setup. Made in the USA, this is the kind of tool that earns its keep on the bench season after season.

Key Specifications

  • Manufacturer: Redding
  • Caliber: .308 Winchester
  • Die Type: Competition Bushing Neck Sizing Die
  • Adjustment: Micrometer bushing position adjustment
  • Bushing Style: Interchangeable, self-centering (sold separately)
  • Thread: 7/8"-14
  • Manufacturer Part Number: 56155
  • UPC: 611760561559
  • Country of Origin: United States
  • Shipping Weight: 0.9875 lbs

What’s Included

  • Redding Competition Bushing Neck Die (.308 Win)
  • Decapping rod assembly
  • Instruction sheet

Frequently Asked Questions

Does the Redding Competition Bushing Neck Die come with a bushing?

No, bushings are sold separately so you can match the exact neck tension to your brass and bullet. To find the right one, measure the outside neck diameter of a loaded cartridge and subtract about .001" for brass spring-back. Redding bushings are offered in both heat-treated steel and titanium nitride in .001" increments.

Is a shellholder included with this die?

Shellholders are not included and are sold separately. For .308 Win you'll want the standard shellholder, and Redding also offers a competition shellholder if you're building out a full match setup. Make sure you have one on hand before your first sizing session.

Do I need an expander button with the Competition Bushing Neck Die?

This die was designed for handloaders who prep their cases carefully and prefer to size without an expander button, which is one of the reasons it produces such consistent neck tension. If you'd rather run an expander, Redding sells carbide size button kits separately that drop into the die.

Will this die fit my reloading press?

Yes, it uses the standard 7/8"-14 thread and works in most common single-stage and turret presses. The micrometer top also lets you set exactly how much of the neck gets sized, so you can size the full neck length or just a portion of it depending on your load.

Additional information

UPC

611760561559

Manufacturer

Manufacturer Part Number

56155

Shipping Weight

0.9875

Reviews

There are no reviews yet.

Be the first to review “Redding Competition Bushing Neck Die .308 Win – MPN 56155”

Related Products