Description
The Redding Type S Match Bushing Full Die Set for .28 Nosler is built for the reloader who wants real control over every part of the case. This two-die set combines a Type S Bushing Full Length Sizing Die with Redding's Competition Seating Die, so you get full-length body sizing and precise neck tension in one operation. It's a favorite among folks loading long-range magnums where consistency on the bench translates straight to tighter groups downrange.
What Makes the Type S Bushing Full Die Different
The heart of this set is the bushing system. Instead of a one-size button pulling the neck open and then squeezing it back down, you choose an interchangeable bushing in .001 inch increments to set exactly how much you want to size the neck. The bushing floats and self-centers on the case neck, which helps keep runout low and concentricity high. If you ever want to size only part of the neck, you can adjust the decapping rod to position the bushing however you like. Pull the bushing and the internal parts out entirely and the die doubles as a body die.
Dialing In the .28 Nosler Competition Seating Die
The Competition Seating Die is where this set earns its reputation. It uses a sliding sleeve that aligns the case and bullet before the bullet ever starts into the neck, which keeps everything straight and repeatable. The micrometer head is calibrated in .001 inch increments, so adjusting seating depth is fast and you can return to a setting without guesswork. The die ships with a standard seating stem that handles most bullet profiles, and a VLD stem is available separately if you're running long, sleek projectiles.
Planning Your .28 Nosler Setup
One thing worth knowing up front: this set does not come with bushings. You pick those separately based on your brass and your target neck tension, and the same goes for the shellholder. The .28 Nosler uses a #6 standard shellholder and a 0.284 bullet diameter, with bushings for this cartridge typically landing in the .310 to .318 range depending on your loaded neck. Everything comes packed in a hard storage box with full instructions to get you started.
Key Specifications
- Brand: Redding
- Model: Type S Match Bushing Full Die Set
- Caliber: .28 Nosler
- Manufacturer Part Number: 36790
- UPC: 611760367908
- Die Set Type: 2-Die Set (Bushing Full Length Sizer + Competition Seating Die)
- Bushing Adjustment: Interchangeable bushings in .001 inch increments
- Bushing Range: 0.310 to 0.318
- Bullet Diameter: 0.284
- Shellholder: #6 standard (sold separately)
- Seating Die: Micrometer Competition Seating Die with sliding sleeve
- Country of Origin: United States
- Shipping Weight: 1.56 lbs
What’s Included
- Type S Bushing Full Length Sizing Die (includes decapping rod, standard sizing button, and decapping pin retainer)
- Competition Bullet Seating Die with sliding sleeve and micrometer adjusting head
- Hard storage die box
- Instructions
Frequently Asked Questions
Does the Redding Type S .28 Nosler die set come with bushings?
No, bushings are sold separately so you can match them to your specific brass and the neck tension you want. The die uses interchangeable bushings in .001 inch increments, with .28 Nosler sizes generally falling in the .310 to .318 range. A good starting point is to measure the neck diameter of a loaded round and subtract a thousandth or two for your tension.
What dies are included in this set?
You get two dies: a Type S Bushing Full Length Sizing Die and a Competition Bullet Seating Die. The sizing die handles full-length body sizing plus bushing-controlled neck sizing, while the seating die uses a sliding sleeve and micrometer head for precise, repeatable seating depth. A shellholder is not included and is sold separately.
Can the sizing die be used as a body die?
Yes. If you remove the bushing and all the internal parts, the Type S Bushing Full Die functions as a body die, sizing the case body and bumping the shoulder without touching the neck. That flexibility makes it handy if you want to pair it with a separate neck sizing step.
Will the Competition Seating Die work with long VLD bullets?
The die ships with a standard seating stem that fits most common bullet shapes just fine. For long, pointed VLD-style bullets, Redding offers a separate VLD seating stem that better matches those ogives and keeps contact where it should be. Swapping stems is quick and doesn't affect your micrometer setting.



Reviews
There are no reviews yet.