0
0

Redding MH-C Master Hunter Deluxe 3-Die Set .260 Rem (Carbide)

UPC: 611760295317

$205.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Redding Master Hunter (MH-C) Deluxe Die Set gives .260 Remington handloaders the best of both worlds: the tight tolerances of competition dies with ammo that feeds and chambers clean when a fast follow-up shot counts. Redding built this line off the success of their National Match dies, then added the features serious hunters kept asking for. The result is a three-die set that lets you size for reliable chambering, seat bullets to within a thousandth of an inch, and switch to neck-only sizing when you're fine-tuning a load at the bench.

What Comes in the .260 Rem Master Hunter Deluxe Set

Three dies cover the full job. The full length sizing die brings the case back to spec and sets shoulder position for smooth chambering, and it carries a free-floating carbide expander button that smooths inside-neck sizing without case lube. The star of the set is the Competition Seating Die, a micrometer-adjustable unit that fully supports and aligns both the case and bullet in a precision ground sleeve before seating begins. That alignment is what keeps runout low and groups tight. Rounding things out is a standard neck sizing die for working brass that stays fire-formed to your chamber, which many handloaders prefer once they've found a load that shoots.

Why the MH-C Dies Earn Their Keep

Redding machines these dies on Super-Precision lathes and uses quality alloy steels, so the fit and finish feel like a tool you'll hand down. The micrometer top on the seating die means you can log a setting, change bullets, and come right back to your number without guesswork. All three dies use the industry standard 7/8-14 thread, so they drop into any common single stage or turret press. For anyone loading the .260 Rem for deer, antelope, or long range practice, this set covers field reliability and bench accuracy in one box.

The die box doubles as a cartridge loading block and storage case, a small touch that keeps your bench tidy and your dies protected between sessions.

Key Specifications

  • Cartridge: .260 Remington
  • Set Type: Master Hunter (MH-C) Deluxe 3-Die Set
  • Dies Included: Full Length Sizing, Competition Seating, Neck Sizing
  • Sizing Button: Free-floating carbide expander
  • Seating Die: Micrometer-adjustable Competition Seating Die
  • Seating Adjustment: 0.001 inch increments
  • Thread: 7/8-14 industry standard
  • Manufacturer: Redding
  • Manufacturer Part Number: 29531
  • UPC: 611760295317
  • Shipping Weight: 1.8 lbs

What’s Included

  • Full Length Sizing Die with carbide size button
  • Competition (micrometer) Bullet Seating Die
  • Standard Neck Sizing Die
  • Die box that doubles as a cartridge loading block and storage case

Frequently Asked Questions

What dies come in the .260 Rem Master Hunter Deluxe set?

This Deluxe set is a three-die package. You get a full length sizing die with a carbide expander button, Redding's micrometer-adjustable Competition Seating Die, and a standard neck sizing die. The neck die is what separates the Deluxe from the two-die Master Hunter set, giving you the flexibility to neck size only when developing loads.

Does the Competition Seating Die really adjust in thousandths?

Yes. The micrometer-equipped seating die lets you set and repeat bullet seating depth to within 0.001 of an inch. You can note a setting, swap to a different bullet, and dial right back to your number, which makes load tuning a lot faster and more consistent.

Will these dies fit my press?

They should fit any standard press. All Redding dies use the industry standard 7/8-14 threaded bodies, so they thread into common single stage, turret, and progressive presses. You will need the correct shellholder for the .260 Rem case head if you don't already have one.

Can I use the carbide button in the neck die?

The carbide size button is supplied in the full length sizing die, but it can be swapped over and used in the neck sizing die if you prefer. The free-floating carbide button smooths inside-neck sizing and does the job without case lube on the neck.

Additional information

UPC

611760295317

Manufacturer

Manufacturer Part Number

29531

Shipping Weight

1.8

Reviews

There are no reviews yet.

Be the first to review “Redding MH-C Master Hunter Deluxe 3-Die Set .260 Rem (Carbide)”