0
0

Redding Instant Indicator Headspace & Bullet Comparator w/ Dial – 7mm PRC

UPC: 611760279362

$173.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload 7mm PRC and chase tight groups, the Redding Instant Indicator takes the guesswork out of sizing and seating. This is the version that comes with the dial indicator installed, so you can drop a case in and read your measurements right away. It compares the shoulder position of fired and sized cases and checks bullet seating depth uniformity, all down to .001 of an inch. The tool threads into your press like a die, which keeps everything repeatable from one session to the next.

What the 7mm PRC Instant Indicator Does at the Bench

The most common job here is setting your full-length or body die for the right amount of shoulder bump. You drop a fired case in, note the reading, then compare it to a freshly sized case so you can see exactly how much the shoulder moved. Dialing in a consistent bump of a couple thousandths helps your brass chamber smoothly and tends to stretch out case life since you're not over-working the shoulder every cycle. It also handles case trim length checks and sorting brass that's been fired in more than one rifle.

Seating Depth and Bullet Sorting With the Redding Instant Indicator

On the seating side, this tool lets you measure base-to-ogive so you can keep your bullet jump consistent from round to round. Pair it with a competition seating die and you can fine-tune how your bullets relate to the lands with real precision. It'll also sort bullets for uniformity if you like to batch your components before a match.

What Comes in the Box

Redding now ships every Instant Indicator with the Range Adapter, which means you can use it at your bench or out at the range without a reloading press. Along with the die body and dial indicator, you get a bore diameter bushing, a surface contactor, a shoulder contactor, a headspace gauge, and full instructions. Worth noting: the Instant Indicator can also be used on a family of cartridges that share the same shoulder angle, so it has a little more range than the caliber on the label.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number (MPN): 27936
  • UPC: 611760279362
  • Cartridge: 7mm PRC
  • Dial Indicator: Included (1 inch x .001 inch)
  • Measurement Resolution: .001 inch
  • Measures: Headspace / shoulder position and bullet seating depth
  • Range Adapter: Included for use without a press
  • Mounting: Threads into reloading press like a die
  • Country of Manufacture: United States
  • Shipping Weight: 1.613 lbs

What’s Included

  • Redding Instant Indicator die body (7mm PRC)
  • 1 inch x .001 inch dial indicator
  • Bore diameter bushing
  • Surface contactor
  • Shoulder contactor
  • Headspace gauge
  • Range Adapter
  • Complete instructions

Frequently Asked Questions

Does this Redding Instant Indicator come with the dial indicator?

Yes. This is the 27936 version that ships with the 1 inch by .001 inch dial indicator already included, so it's ready to read measurements out of the box. If you already own a compatible dial, Redding also makes a without-dial version under part number 17936.

What can I measure with the 7mm PRC Instant Indicator?

It checks headspace by comparing the shoulder position of fired versus sized cases, which is how you set your sizing die for the right shoulder bump. It also measures bullet seating depth to the ogive and helps sort brass and bullets for uniformity. You can even use it to track case trim length as your brass grows.

Do I need a reloading press to use it?

Not anymore. The tool threads into a press like a die for bench work, but Redding now includes a Range Adapter with every Instant Indicator so you can use it at the range or in the field without a press. For most handloaders it lives right on the press for quick checks during a loading session.

Will this 7mm PRC unit work with any other cartridges?

It can. The Instant Indicator can be used on a family of cartridges that share the same shoulder angle, so it isn't strictly limited to the caliber printed on it. For bullet seating depth checks you'll want the correct bore diameter bushing for whatever cartridge you're working with.

Additional information

UPC

611760279362

Manufacturer

Manufacturer Part Number

27936

Shipping Weight

1.613

Reviews

There are no reviews yet.

Be the first to review “Redding Instant Indicator Headspace & Bullet Comparator w/ Dial – 7mm PRC”