Description
The Redding Instant Indicator for 6.5 PRC takes the guesswork out of tuning your handloads. It gives you a fast, repeatable way to compare the shoulder position of fired versus sized brass and verify bullet seating depth, all within .001 of an inch. The headspace reading runs from the case shoulder to the base, which is exactly the information you need when you're setting a full-length sizing die to bump the shoulder just the right amount. Drop a case in, read the dial, and you know precisely how much sizing is happening.
What the 6.5 PRC Instant Indicator Does on Your Bench
This tool earns its keep in a few ways. You can zero the dial off the included reference, run your fired brass up into it, and instantly see whether a case sits over or under minimum headspace. That same readout lets you fine-tune how far you're pushing the shoulder back, which is a big deal for brass life since most folks are surprised how much they've been overworking their cases. Beyond shoulder bump, it checks bullet seating depth uniformity, sorts cases fired in different rifles, compares trim lengths, and even sorts bullets for consistency.
Built Around the 6.5 PRC Cartridge
The die body threads into your press like a standard die, with a precision dial indicator already mounted on top. Internally it uses a sliding shoulder contactor, a blank contactor, and a pressure spring to give you clean, repeatable readings. It's set up specifically for the 6.5 PRC, though it can work across a family of cartridges that share the same shoulder angle. This version ships with the dial indicator already installed, so it's ready to calibrate and use once you have it mounted.
Why 6.5 PRC Reloaders Reach for It
Precision long-range loads live and die by consistency, and this is the kind of tool that pays for itself once you see it work. The newer models also include a Range Adapter that threads onto the bottom, so you can take measurements at the bench or out at the range without tying up a press. For anyone chasing tight groups with the 6.5 PRC, having that instant feedback on every round is tough to beat.
Key Specifications
- Caliber: 6.5 PRC
- Measurement Resolution: .001 inch
- Dial Indicator: 1" x .001", pre-mounted
- Measures: Headspace (shoulder to base) and bullet seating depth
- Range Adapter: Included for press-free use at the range
- Mounting: Threads into standard reloading press
- Manufacturer: Redding
- Manufacturer Part Number: 27487
- UPC: 611760274879
- Shipping Weight: 1.571 lbs
What’s Included
- Instant Indicator die body
- Pre-mounted 1" x .001" dial indicator
- Bore diameter bushing
- Surface contactor
- Shoulder contactor
- Headspace gauge
- Range Adapter
- Complete instructions
Frequently Asked Questions
Does the 6.5 PRC Instant Indicator come with the dial indicator?
Yes, this version (part number 27487) ships with the 1" x .001" dial indicator already mounted on the die body. It's ready to calibrate and use once you have it set up. Redding also offers a no-dial version if you already own a compatible indicator.
Do I need a reloading press to use the Instant Indicator?
The die body threads into a standard reloading press, and many folks keep one set up on a dedicated press or turret station for quick checks while sizing. That said, this model includes a Range Adapter that screws onto the bottom, letting you take measurements without a press. That makes it handy at the bench or out at the range.
What exactly can the Redding Instant Indicator measure?
It measures headspace from the case shoulder to the base, which tells you how much shoulder bump you're getting after sizing. It also checks bullet seating depth uniformity, trim length consistency, and lets you sort cases and bullets for uniformity. Everything reads to within .001 of an inch.
Will this tool work with other cartridges besides 6.5 PRC?
It's built specifically for the 6.5 PRC, but Redding notes it can be used across a family of cartridges that share the same shoulder angle. You'll want to confirm your cartridge matches before relying on it for another chambering. For dedicated 6.5 PRC work, it's dialed right in.




Reviews
There are no reviews yet.