0
0

Redding Case Neck Gauge with Indicator 26400 | .17 to .338 Cal

UPC: 611760264009

$122.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you reload for accuracy, uneven neck walls are one of those hidden gremlins that quietly open up your groups. The Redding Case Neck Gauge with Indicator gives you a fast, repeatable way to catch those inconsistencies. You seat the case over the pilot stop, spin it under the dial indicator, and watch the needle tell you exactly how uniform that neck wall really is. The large dial reads in .001" increments, so you can sort your brass into tidy lots by thickness or spot the cases that need neck turning before they ever make it into a load.

What the Redding Case Neck Gauge Measures

Uniform neck wall thickness is a solid indicator of overall case quality. When Redding points out that a large variation in the neck usually hints at similar or greater variation down in the body and shoulder, they're giving you a shortcut: check the neck and you learn a lot about the whole case. This gauge measures that wall thickness directly, which is tough to pull off accurately with a standard ball micrometer, especially when you're working through a big pile of brass. It's equally useful for verifying your work after a neck turning session.

Caliber Range and Setup on the Redding Neck Gauge

Two mandrels ship with the tool to cover the full span from .17 caliber up to .338 caliber, and it handles cases with flash holes as small as .060". The .22 and .30 caliber pilot stops come in the box, with additional caliber pilot stops available separately if you need them. Each pilot stop is CNC machined from stainless steel and slightly undercut for a snug fit in the case mouth, which keeps your readings smooth and consistent.

The aluminum base can mount directly to your reloading bench for a permanent spot, or you can clamp it down temporarily when bench space is tight. The dial indicator ships packaged separately so it arrives undamaged, then installs and zeroes in a minute. For precision shooters chasing single-digit standard deviations and tighter groups, sorting brass by neck uniformity is one of the simplest habits that pays off downrange.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 26400
  • UPC: 611760264009
  • Caliber Range: .17 to .338 caliber
  • Dial Indicator Increments: .001"
  • Accuracy: .001"
  • Minimum Flash Hole: .060"
  • Mandrels Included: Two (.22 and .30 caliber)
  • Pilot Stop Material: CNC machined stainless steel
  • Base Material: Aluminum
  • Mounting: Direct bench mount or clamp
  • Shipping Weight: 1.0125 lbs

What’s Included

  • Case neck gauge body with aluminum mounting base
  • Dial indicator (packaged separately)
  • Two mandrels covering .17 to .338 caliber
  • .22 caliber pilot stop
  • .30 caliber pilot stop

Frequently Asked Questions

What calibers does the Redding Case Neck Gauge cover?

The two included mandrels let the gauge measure cases from .17 caliber all the way up to .338 caliber. It also handles cases with flash holes as small as .060". The .22 and .30 caliber pilot stops come in the box, and other caliber pilot stops are available separately if you need to cover something outside those two.

Does the dial indicator come with the Redding Case Neck Gauge?

Yes, the dial indicator is included. Redding packages it separately inside the box to protect it from shipping damage, so you install and zero it before your first use. It reads in .001" increments for clear, repeatable feedback on neck uniformity.

Do I need to prep brass before using the Redding Case Neck Gauge?

For the most consistent readings, many reloaders expand the case neck first so it seats cleanly on the pilot stop. The slightly undercut stainless stops are made to fit snugly in the case mouth for smooth rotation under the indicator. From there it's just a matter of spinning the case and reading the dial.

Can the Redding Case Neck Gauge be mounted to my bench?

Absolutely. The aluminum base is designed to mount directly to your reloading bench for a permanent setup. If you'd rather keep it portable or free up bench space, you can clamp it down temporarily instead.

Additional information

UPC

611760264009

Manufacturer

Manufacturer Part Number

26400

Shipping Weight

1.0125

Reviews

There are no reviews yet.

Be the first to review “Redding Case Neck Gauge with Indicator 26400 | .17 to .338 Cal”