Description
If you're loading .30-30 Winchester at the bench, this is the shell holder you want feeding brass into your press. The Redding #2 E-Z Feed holds the case head firmly through every stage of the process, from full-length sizing to seating and crimping, so your rounds come out consistent from the first to the last. The tapered mouth is the real standout here, giving each case a little funnel to drop into instead of fighting to line it up by feel.
Redding builds these from quality steel, heat-treats them for long-term durability, and adds outside knurling so you can grab and change holders without fumbling, even with reloading lube on your fingers. They're precision-machined to tight tolerances, which keeps the case sitting square and eliminates the slop that can throw off your sizing and seating depth.
What the Redding #2 Shell Holder Fits
While this listing calls out .30-30 Winchester, the #2 covers a whole family of cartridges that share the same case head. That includes .32 Winchester Special, 7-30 Waters, .25-35 Winchester, .375 Winchester, .38-55 WCF, .307 Winchester, .356 Winchester, and a long list of wildcats built off the .30-30 case. If you load more than one of those, a single #2 does double duty.
Putting the E-Z Feed #2 to Work
The universal snap-in design drops into most popular single stage and turret presses, so it'll slide right into your RCBS, Redding, Lyman, Hornady, or similar setup without any fuss. It's a small part that does a big job, and getting the right one for your caliber makes the whole reloading session smoother. For anyone running the classic .30-30 lever gun and keeping their own brass in rotation, the #2 is the holder that belongs in the kit.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 11002
- UPC: 611760110023
- Shell Holder Size: #2
- Primary Caliber: .30-30 Winchester
- Also Fits: 7-30 Waters, .32 Winchester Special, .25-35 Winchester, .375 Winchester, .38-55 WCF and more
- Material: Heat-treated steel
- Design: E-Z Feed tapered, outside knurled
- Press Compatibility: Most single stage and turret presses
- Style: Press Type
- Country of Origin: United States
What’s Included
- One Redding #2 E-Z Feed shell holder
Frequently Asked Questions
Will the Redding #2 shell holder work for my .30-30 Winchester brass?
Yes, the #2 is the correct Redding shell holder for .30-30 Winchester. It grips the case head securely through sizing, seating, and crimping so your loads stay consistent.
What other calibers does the #2 E-Z Feed shell holder cover?
The #2 fits a family of cartridges that share the same case head dimensions as the .30-30. That includes 7-30 Waters, .32 Winchester Special, .25-35 Winchester, .375 Winchester, .38-55 WCF, .307 Winchester, and .356 Winchester, plus a number of wildcats built on the .30-30 case.
Does this shell holder fit my press?
The E-Z Feed uses a universal snap-in design that works with most popular single stage and turret presses, including RCBS, Redding, Lyman, and Hornady setups. If your press takes standard snap-in holders, this one will drop right in.
What makes the E-Z Feed different from a standard shell holder?
The E-Z Feed has a tapered mouth that acts like a little funnel, so cases slide in easier instead of needing to be lined up perfectly by hand. It's precision-machined from heat-treated steel with outside knurling, which makes the holder both durable and easy to swap out between calibers.





Reviews
There are no reviews yet.