Description
If you're feeding a .338 Weatherby RPM, factory ammo can be hard to come by and pricey when you find it, which makes rolling your own a smart move. This RCBS Full Length Die Set covers the two main jobs at the bench for this bottleneck magnum: resizing fired brass back to spec and seating your bullet of choice. It's the same dependable design that reloaders have trusted RCBS for across decades of handloading.
What the .338 Weatherby RPM Die Set Handles
The set is a two-die package built for bottleneck rifle cases. The full-length sizer die runs the whole case body back down to SAAMI minimum cartridge dimensions, deprimes the spent primer, and expands the neck so it's ready to take a new bullet. Vent holes in the sizer let trapped air and extra lube escape, so you don't dent or buckle a case on the downstroke. Headspace is held to minimum tolerances so the case body length stays put through sizing, which keeps your shoulder bump consistent from piece to piece.
Seating and Crimping with the 28401 Set
The seater die includes a bullet seater plug and a built-in roll crimper, so you can set bullet depth and crimp in the same stroke if your load calls for it. Both dies thread into any standard press with the common 7/8"-14 threads, so this drops right into the gear you already own. They're machined from RCBS proprietary die steel for a long service life.
The .338 Weatherby RPM is a modern short magnum built on the 6.5 Weatherby RPM case necked up to .338 caliber. It runs big-game ballistics in the neighborhood of the .338 Winchester Magnum, sending a 225-grain bullet around 2,800 fps, all from a trimmer, lighter rifle that backcountry elk and moose hunters appreciate. Handloading lets you tune that performance to your specific barrel and favorite projectile.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 28401
- UPC: 604544689693
- Caliber: .338 Weatherby RPM
- Die Set Type: Full Length, 2-Die Set
- Dies Included: Full-Length Sizer, Bullet Seater
- Die Series: Group D, Bottleneck Rifle Cartridges
- Thread Pattern: 7/8"-14
- Material: Proprietary Die Steel
- Crimp Type: Built-in Roll Crimper (seater die)
- Shipping Weight: 1.29 lbs
What’s Included
- Full-Length Sizer Die with Expander-Decapping Unit
- Seater Die with Bullet Seater Plug and built-in roll crimper
- RCBS green die storage box
Frequently Asked Questions
What dies come in the RCBS .338 Weatherby RPM set?
This is a two-die set that includes a full-length sizer die with an expander-decapping unit and a seater die with a bullet seater plug. The sizer handles resizing, depriming, and neck expansion, while the seater sets bullet depth. That covers the core steps for loading this bottleneck cartridge.
Will these dies fit my reloading press?
Yes. Both dies use the standard 7/8"-14 thread pattern, which is the industry norm for single-stage and most turret and progressive presses. If your press takes common rifle dies, this set threads right in.
Does the seater die crimp the bullet?
It does. The seater die has a built-in roll crimper, so you can seat the bullet and apply a crimp in the same stroke if your load calls for one. You can also back the crimp out and seat without crimping if you prefer.
Do I need a shell holder with this .338 Weatherby RPM set?
A shell holder is not included and is sold separately, since it's matched to the case rim rather than the dies. You'll want the correct RCBS shell holder for the .338 Weatherby RPM rebated rim to run these dies on your press.





Reviews
There are no reviews yet.