Description
If you're loading 6mm ARC and chasing tight groups, bullet seating is where the little details add up fast. The RCBS MatchMaster Competition Seating Die puts the control right in your hand with an oversized micrometer knob that lets you dial in one thousandth of an inch at a time, exactly what you asked for. The big letters and hash marks are easy to read under range lights or on a cluttered bench, so you spend less time squinting and more time loading.
This die is machined from case-hardened steel, with inside surfaces precision-drilled, reamed, and hand polished before it ever leaves the factory. The deep blued finish is the kind you'd expect on a fine rifle, and it holds up to years of use on the bench. A free-floating, self-centering seating stem keeps the bullet square to the case, which is what gives you the concentric rounds that matter when you're loading for accuracy.
What Sets the MatchMaster Seating Die Apart
The standout feature is the loading window. Instead of balancing a bullet on the case mouth and hoping it stays put, you just drop it through the opening and run the press. The internal sleeve catches the bullet, holds it in alignment with the case, and guides it straight down during seating. It's faster, it keeps your fingers clear, and it takes a lot of the guesswork out of consistent seating depth.
Fitting the 6mm ARC MatchMaster Die to Your Press
This is a stand-alone bullet seating die, not a full set, so it's a great match if you already have a sizing setup and want to upgrade your seating. It uses a standard 7/8"-14 thread, so it threads into any common reloading press. Made in the USA and backed by RCBS's limited lifetime warranty, it's built to earn a permanent spot in your reloading rotation.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 28040
- UPC: 604544675245
- Caliber: 6mm ARC
- Die Type: Competition Bullet Seating Die
- Series: MatchMaster
- Adjustment: Oversized Micrometer, 0.001" increments
- Seating Stem: Free-Floating, Self-Centering
- Loading Feature: Bullet Seating Window with Retention System
- Material: Case-Hardened Steel
- Finish: Deep Blued
- Thread: 7/8"-14
- Warranty: Limited Lifetime
- Country of Origin: Made in USA
What’s Included
- RCBS MatchMaster Competition Seating Die for 6mm ARC (seating die only)
Frequently Asked Questions
Is the RCBS MatchMaster 6mm ARC die a full set or just the seating die?
This is a stand-alone bullet seating die only. It does not include a sizing die or shell holder. It's a solid pick if you already have a sizing setup and want to upgrade the seating side of your 6mm ARC loading.
Will this MatchMaster seating die fit my press?
Yes, it uses the industry-standard 7/8"-14 thread, so it threads into any common single-stage or turret press. If your press takes standard dies, you're good to go.
How precise is the micrometer on the MatchMaster seating die?
The oversized micrometer adjusts in one-thousandth-of-an-inch increments, so when you dial a number, that's what you get. The large letters and hash marks make it easy to read and repeat your settings batch to batch.
What does the loading window on the MatchMaster seater actually do?
It lets you drop the bullet in through the side opening instead of balancing it on the case mouth. An internal sleeve catches and holds the bullet in alignment with the case, then guides it straight down as you run the press. The result is faster seating, fewer fumbled bullets, and more concentric rounds.



Reviews
There are no reviews yet.