Description
The RCBS MatchMaster Competition Seating Die in .260 Remington is RCBS taking everything they learned from the Gold Medal and Competition die lines and rolling it into one seriously refined seater. This is a dedicated bullet seating die, so it pairs with your existing sizing die to round out your .260 Rem setup. For folks chasing single-digit extreme spreads and ammo that shoots as good as it looks, this is the kind of tool that earns a permanent spot on the bench.
The real talking point here is the bullet seating window with the retention system. Instead of balancing a bullet on the case mouth and guiding it up with your fingers, you drop the bullet in through the window and run the press. An internal sleeve catches and holds the bullet in perfect alignment with the case, then guides it the whole way through seating. The payoff is concentric ammo and a workflow that is both faster and a lot easier on your patience. Reviewers who spend serious time behind a press have called out its low runout numbers and tight five-shot groups, which is exactly what this die was built to do.
Dialing In Your .260 Rem with the MatchMaster
Seating depth runs off a large oversized micrometer knob calibrated in .001 inch increments. The numbers and hash marks are big and easy to read, so dialing a specific seating depth is straightforward whether you are chasing the lands or working up a new load. The free-floating, self-centering seating stem does the alignment work for you, and the adjustable stem gives you room to tune overall length.
Build Quality That Matches the Name
RCBS machines these from case-hardened steel, with precision-drilled and reamed internals that get hand polished before they ship. The body wears a deep blued finish that would look at home on a fine rifle. It uses the standard 7/8-14 thread, so it drops right into any standard reloading press. Released at the end of 2024, the MatchMaster line is one of the newer premium options out there, and it holds its own against the long-standing names in competition seating dies.
Key Specifications
- Caliber: .260 Remington
- Die Type: Bullet Seating Die (standalone)
- Adjustment: Oversized micrometer, .001 inch increments
- Seating Stem: Free-floating, self-centering
- Loading Feature: Bullet seating window with retention system
- Material: Case-hardened steel, hand polished, blued finish
- Thread: Standard 7/8-14
- Manufacturer: RCBS
- Manufacturer Part Number: 12840
- UPC: 604544654424
- Shipping Weight: 0.9 lbs
What’s Included
- RCBS MatchMaster Competition Seating Die, .260 Remington
- Green RCBS die storage box
Frequently Asked Questions
Does the MatchMaster seating die also size cases?
No, this is a dedicated bullet seating die only. You will need to pair it with a full-length or neck sizing die to have a complete .260 Remington reloading setup. RCBS does offer MatchMaster full-length and neck sizing die sets if you want to keep everything in the same family.
How does the loading window work?
Instead of balancing a bullet on the case mouth, you drop the bullet in through the window on the side of the die and run the press. An internal sleeve catches and holds the bullet in alignment with the case, guiding it straight through the seating process. It speeds things up and keeps your fingers clear of the case mouth.
How is seating depth adjusted on this die?
Seating depth is set with the large oversized micrometer knob on top of the die, calibrated in .001 inch increments. The numbers and hash marks are big and easy to read, so you can return to a known setting or make fine adjustments without guesswork.
Will this die fit a standard reloading press?
Yes. The MatchMaster seating die uses the standard 7/8-14 thread, so it threads right into any standard single-stage or progressive press that accepts common dies. No special press or adapter is needed.





Reviews
There are no reviews yet.