Description
The RCBS Matchmaster Competition Seating Die takes dead aim at one job and does it extremely well: seating bullets straight and repeatable for the .22-250 Remington. This is a stand-alone seating die, so it pairs with whatever sizing die you already run for the caliber. The body is machined from case-hardened steel, polished inside and out, and finished with a deep blued coat that looks right at home next to a nice rifle. It threads into any standard single-stage or turret press with the common 7/8 inch-14 thread.
What Makes the Matchmaster Seating Die Different
The headliner is the bullet loading window cut into the side of the die. Instead of balancing a bullet on the case mouth and guiding it up with your fingers, you drop the bullet through the window where an internal retention sleeve holds it in alignment, waiting for the charged case to come up and meet it. It saves your fingertips and, more importantly, it keeps the bullet square to the case for concentric seating every pull of the handle.
Dialing In Seating Depth
The oversized micrometer knob up top is the other reason reloaders reach for this die. It adjusts in clean .001 inch increments with large, easy-to-read numbers and hash marks, so load development and repeatable setups are simple. Dial in a change, write it down, and come back to the exact same spot later. Underneath, a free-floating, self-centering seating stem lets the bullet find its own true alignment with the bore of the die, which is where the low runout numbers come from. Testers running these dies have reported runout in the single-thousandths range measured off the ogive.
Built for Precision .22-250 Loads
The .22-250 Remington is a flat-shooting, high-velocity round that varmint hunters and range shooters love to tune, and seating depth matters when you are chasing the tightest groups a barrel will give. This die blends features from the Gold Medal and Competition lines into one precision tool. It is made in the USA and backed by the RCBS Limited Lifetime Warranty.
Key Specifications
- Manufacturer: RCBS
- Series: MatchMaster Competition
- Product Type: Bullet Seating Die
- Caliber: .22-250 Remington
- Manufacturer Part Number: 10640
- UPC: 604544654356
- Thread Size: 7/8 inch-14
- Micrometer Adjustment: 0.001 inch increments
- Material: Case-hardened steel
- Finish: Deep blued
- Seating Stem: Free-floating, self-centering
- Warranty: Limited Lifetime Warranty
- Country of Origin: Made in USA
- Shipping Weight: 0.95 lbs
What’s Included
- RCBS Matchmaster Competition bullet seating die (.22-250 Remington)
- Storage box
Frequently Asked Questions
Does the Matchmaster Competition Seating Die also size cases?
No, this is a dedicated bullet seating die only. You will need to pair it with a full-length or neck sizing die in .22-250 Remington for a complete reloading setup. Many reloaders run it alongside a sizing die they already own.
How is seating depth adjusted on this die?
Seating depth is set with the oversized micrometer knob on top of the die, calibrated in .001 inch increments. The large numbers and hash marks make it easy to read and dial in repeatable changes during load development. Note your setting and you can return to the exact same depth later.
What is the bullet loading window for?
The side window lets you drop a bullet into the die where an internal retention sleeve holds it in alignment with the case. This eliminates balancing the bullet on the case mouth and guiding it up with your fingers, which helps with concentricity and saves your fingertips. It is one of the standout features of the Matchmaster seating die.
Will this die fit my press?
Yes, it uses the standard 7/8 inch-14 die thread, so it threads into virtually any single-stage or turret reloading press. A shellholder is not included, so make sure you have the correct one for the .22-250 Remington.





Reviews
There are no reviews yet.