Description
The RCBS Matchmaster Competition Neck Bushing Die Set in 6.5 Creedmoor is built for handloaders who chase small groups and repeatable results. This is a two-die set pairing a neck sizing bushing die with the Matchmaster competition seating die, and it pulls together the strongest features RCBS carried over from its Gold Medal and Competition lines. Both dies use the standard 7/8"-14 thread, so they drop right into any common single-stage press.
The neck sizing die works off interchangeable neck bushings, which are sold separately so you can match the exact amount of neck tension your rifle and bullet combo likes. Because it only sizes the neck and leaves the body dimensions of your fired cases alone, you keep brass working to a minimum and stretch the life of your cases. The die also carries a titanium carbo nitride coated expander that cuts down on brass buildup and gives you smooth case extraction every stroke.
What Sets the Matchmaster Neck Bushing Die Apart
The seating die is where this set really earns its keep. It aligns the case and bullet before they ever touch, then guides them together through the full seating stroke, which is how you get the concentric ammo that shrinks groups downrange. A bullet seating window with a retention system holds the bullet steady and helps prevent deformation, while the free-floating, self-centering stem keeps everything square.
Getting the Most Out of Your 6.5 Creedmoor Loads
Adjustments are handled by a large oversize micrometer with big, easy-to-read markings. Dial in one thousandth of an inch and that is what you get, which makes load development and seating depth testing far less fiddly. The dies are machined and polished with a deep blued finish, backed by an RCBS limited lifetime warranty, and made in the USA. For anyone loading precision 6.5 Creedmoor for competition or long range, this set gives you the control to tune rounds the way you want them.
Key Specifications
- Caliber: 6.5mm Creedmoor
- Die Style: Neck Bushing Sizing Die Set (Neck Sizer + Seater)
- Thread: 7/8"-14 Standard
- Expander: Titanium Carbo Nitride Coated
- Seating Adjustment: Large Oversize Micrometer
- Seating Stem: Free-Floating, Self-Centering
- Neck Bushing: Interchangeable, Sold Separately
- Warranty: Limited Lifetime
- Country of Origin: Made in USA
- Manufacturer: RCBS
- Manufacturer Part Number: 32910
- UPC: 604544654318
What’s Included
- Matchmaster neck sizing bushing die
- Matchmaster competition bullet seating die
Frequently Asked Questions
Does the Matchmaster Neck Bushing Die Set come with a bushing?
No, the neck bushings are sold separately so you can pick the exact diameter that gives you the neck tension your rifle and bullet prefer. This lets you fine-tune tension rather than being locked into a fixed size. Most reloaders keep a few bushings on hand to test different amounts of tension during load development.
What dies are included in this 6.5 Creedmoor set?
This is a two-die set that includes the neck sizing bushing die and the Matchmaster competition bullet seating die. The neck die sizes only the case neck using an interchangeable bushing, while the seater uses a micrometer and a free-floating stem for precise, concentric bullet seating.
Will these dies fit my press?
Yes, both dies use the standard 7/8"-14 thread, so they thread into any common single-stage press or standard die station. No special adapters are needed.
Why choose a neck bushing die over a standard sizing die?
A neck bushing die lets you control exactly how much tension sits on the bullet by swapping bushings, which benchrest and long-range reloaders rely on for consistency. It also sizes only the neck and leaves the fired case body alone, which keeps brass working to a minimum and extends case life.





Reviews
There are no reviews yet.