Description
The RCBS Matchmaster line sits at the top of the company's die lineup, and this neck bushing set for the 6.5 PRC is aimed squarely at the precision crowd. Instead of a fixed-diameter sizing die, this one uses interchangeable, self-centering neck bushings so you can control exactly how much tension sits on the bullet. That approach keeps your brass from getting overworked, which is a big deal for a cartridge like the 6.5 PRC where good quality brass is worth stretching across as many firings as possible. The set runs a standard 7/8"-14 thread, so it drops right into any common single-stage press.
What the 6.5 PRC Matchmaster Bushing Set Brings to the Bench
The sizing die carries a titanium carbo nitride expander, which cuts down on brass buildup and keeps case extraction smooth pull after pull. The real talking point is the seating die. It uses a micrometer adjustment with large, easy-to-read numbers and hash marks, so you can repeat a seating depth down to a thousandth of an inch and get right back to it next session. A free-floating, self-centering seating stem keeps everything aligned for concentric loaded rounds.
Loading Day With the Matchmaster Seating Die
One of the nicer touches is the seating window. You drop the bullet into the window, run the press, and an internal sleeve catches the bullet and holds it in line with the case mouth as it seats. No balancing bullets on a case neck or getting fingers close to the action. For anyone loading match rounds in volume, that window saves time and keeps your seating consistent.
Keep in mind the neck bushings are sold separately, which is standard for any bushing-style die since the right size depends on your brass and bullet combo. To find your starting bushing, measure the outside neck diameter of a loaded round and subtract about .002 inches. The dies are made from case-hardened steel with inside surfaces precision-drilled, reamed, and hand polished, and they're backed by RCBS's limited lifetime warranty.
Key Specifications
- Manufacturer: RCBS
- Model: Matchmaster Competition Neck Bushing Die Set
- Caliber: 6.5 PRC
- Die Style: Neck Bushing Sizing
- Number of Dies: 2
- Thread Size: 7/8"-14
- Expander: Titanium Carbo Nitride
- Seater Adjustment: Micrometer
- Material: Case-Hardened Steel
- Country of Origin: USA
- Warranty: Limited Lifetime
- Manufacturer Part Number: 32110
- UPC: 604544654295
- Shipping Weight: 1.4 lbs
What’s Included
- Neck bushing sizing die
- Micrometer bullet seating die
- Die storage box
Frequently Asked Questions
Do neck bushings come with the Matchmaster 6.5 PRC die set?
No, the neck bushings are sold separately. This is standard for any bushing-style die since the correct bushing diameter depends on your brass thickness and bullet choice. You'll want to pick up at least one RCBS bushing in the right size before your first loading session.
How do I figure out which bushing size I need?
Measure the outside neck diameter of a loaded round with a micrometer, then subtract about .002 inches to allow for brass springback. That gives you a solid starting point for roughly .002 inches of neck tension. Many reloaders keep a bushing or two on either side of that number to fine-tune their loads.
Will this die set fit my press?
Yes, it uses a standard 7/8"-14 thread, so it threads into any common single-stage reloading press. No shellholder is included, so make sure you have the correct one for the 6.5 PRC case head.
What makes the Matchmaster seating die worth it?
The seating die uses a large micrometer head with clear markings for repeatable seating depth down to a thousandth of an inch. It also features a bullet-retaining loading window and a free-floating, self-centering stem that keeps bullets aligned with the case for concentric, consistent rounds.





Reviews
There are no reviews yet.