0
0

RCBS MatchMaster Competition Neck Bushing Die Set – 6mm Dasher

UPC: 604544654080

$186.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Built for the handloader chasing tight groups, the RCBS MatchMaster Competition Neck Bushing Die Set for 6mm Dasher brings benchrest-level control to your loading bench. The set pairs a neck-sizing bushing die with the MatchMaster competition seater, giving you a repeatable way to set neck tension and seat bullets with excellent alignment. Because this is a neck-only sizing die, it works the brass as little as possible, keeping body dimensions of your fired cases where you want them and stretching out case life.

What Makes the MatchMaster Neck Bushing Sizer Different

The sizing die uses RCBS precision-machined neck bushings to size the neck from the outside, so you can pick exactly how much tension you want on the bullet. The bushings are swappable and self-centering, a setup that benchrest and long-range precision crowds have leaned on for years. It also runs a titanium carbo-nitride coated expander that smooths out case extraction and cuts down on brass buildup, which helps reduce stretch at the neck. Worth noting: the neck bushings are sold separately so you can match the exact tension to your brass. To find your size, measure the outside neck diameter of a loaded round and subtract .002 to .003 inches to allow for brass springback.

Seating Die That Earns Its Keep

The MatchMaster seater is the standout here. It features a bullet loading window with a retaining system, so you drop the bullet into the port and run the press rather than balancing it on the case mouth. An internal sleeve catches and guides the bullet in line with the case for consistent, concentric seating. Up top, the large oversized micrometer knob has easy-to-read hash marks and adjusts in one-thousandth-inch increments, and the whole die carries a deep blued finish like a fine firearm.

Fitment for Your 6mm Dasher Setup

Both dies use the standard 7/8 inch by 14 thread, so they drop right into any common single-stage press. The 6mm Dasher is a popular PRS and benchrest cartridge, and this set gives you the tools to tune loads to your chamber and brass.

Key Specifications

  • Manufacturer: RCBS
  • Caliber: 6mm Dasher
  • Die Style: Neck Size Bushing Die Set
  • Set Includes: Neck Sizing Die and Bullet Seating Die
  • Neck Bushings: Sold separately
  • Expander: Titanium Carbo-Nitride coated
  • Seating Adjustment: Oversized micrometer
  • Seating Feature: Bullet loading window with retaining system
  • Thread: Standard 7/8"-14
  • Material: Case-hardened steel
  • Manufacturer Part Number: 12310
  • UPC: 604544654080
  • Shipping Weight: 0.5 lbs
  • Warranty: Limited Lifetime Warranty

What’s Included

  • Neck Sizing Bushing Die
  • MatchMaster Competition Bullet Seating Die

Frequently Asked Questions

Do neck bushings come with the RCBS MatchMaster Neck Bushing Die Set?

No, the neck bushings are sold separately so you can match the exact tension to your brass and load. To pick the right size, measure the outside neck diameter of a loaded cartridge and subtract .002 to .003 inches to account for brass springback. RCBS makes precision-machined bushings, and many standard bushings from other brands will fit as well.

What is the difference between the neck bushing set and the full-length set?

This neck bushing set sizes only the case neck, leaving the body dimensions of your fired brass untouched, which works the brass less and extends case life. The full-length version resizes the case body along with the neck. Neck-only sizing is popular with benchrest shooters running brass fire-formed to a specific chamber.

Will these dies fit my press?

Yes, both dies use the standard 7/8 inch by 14 thread, so they thread into any common single-stage reloading press. No special adapters or hardware are needed.

What makes the MatchMaster seating die worth it?

The seater has a bullet loading window with a retaining system, so you drop the bullet into the port and run the press instead of balancing it on the case mouth. An internal sleeve guides the bullet in alignment with the case for concentric results, and the oversized micrometer adjusts seating depth in one-thousandth-inch steps with easy-to-read markings.

Additional information

UPC

604544654080

Manufacturer

Manufacturer Part Number

12310

Shipping Weight

0.5

Reviews

There are no reviews yet.

Be the first to review “RCBS MatchMaster Competition Neck Bushing Die Set – 6mm Dasher”