Description
If you're loading .300 Remington Ultra Magnum and want your handloads to shoot as tight as the rifle is capable of, this is RCBS at the top of its game. The Matchmaster line blends the best bits of the old Gold Medal and Competition die families into one two-die set: a bushing full-length sizing die and a micrometer bullet seating die. Both are built on standard 7/8"-14 threads, so they screw right into any common single-stage press without any fuss.
What Makes the Matchmaster Sizing Die Different
The full-length sizer uses an interchangeable neck bushing, which is the whole point of a set like this. You pick the bushing diameter to set your exact neck tension rather than being stuck with whatever a standard die hands you. A good starting point is measuring the outside neck diameter of a loaded round and subtracting about .002" to .003" to allow for brass spring-back. Inside the die is a titanium carbo-nitride coated expander that cuts down on friction and brass build-up, so case extraction stays smooth and your necks don't get stretched around. The bushings themselves are sold separately, so plan on grabbing the right size for your brass when you order.
Seating That Takes the Guesswork Out
The Matchmaster seater die is where a lot of folks fall in love with this set. It uses a free-floating, self-centering stem paired with a large, easy-to-read micrometer that adjusts seating depth in clean, repeatable increments. The real party trick is the loading window: you drop the bullet in through the side, run the press, and the internal sleeve lines everything up for you. No more balancing a bullet on the case mouth or pinching fingertips.
The fit and finish match the performance. Each die is machined, polished, and finished to a standard that feels more like a nice firearm than a bench tool, and it's all made in the USA and backed by RCBS's limited lifetime warranty. For the .300 RUM reloader focused on long-range consistency, this set gives you the tuning room to really chase accuracy.
Key Specifications
- Manufacturer: RCBS
- Model: Matchmaster Full-Length Bushing Die Set
- Caliber: .300 RUM (Remington Ultra Magnum)
- Die Type: Bushing Full-Length Sizing / Micrometer Bullet Seating
- Number of Dies: 2
- Thread: 7/8"-14
- Expander: Titanium Carbo-Nitride Coated
- Seating Stem: Free-floating, self-centering, micrometer adjustable
- Neck Bushing: Sold separately
- Warranty: Limited Lifetime
- Country of Origin: Made in USA
- Manufacturer Part Number: 17608
- UPC: 604544653892
- Shipping Weight: 1.25 lbs
What’s Included
- Full-length bushing sizing die
- Micrometer bullet seating die
- Decapping pin assembly
Frequently Asked Questions
Does the Matchmaster .300 RUM die set come with neck bushings?
No, the neck bushings are sold separately. The sizing die is built to use interchangeable bushings so you can set your own neck tension, but you'll need to purchase the correct bushing size for your brass. To find the right size, measure the outside neck diameter of a loaded cartridge and subtract about .002" to .003".
Will this die set fit my reloading press?
Yes. Both dies use the standard 7/8"-14 thread, so they thread into any common single-stage press. You'll also want the correct shellholder for the .300 RUM case head, which is not included in the set.
What's the advantage of a bushing die over a standard sizing die?
A bushing die lets you control exactly how much neck tension you put on the bullet by swapping bushing diameters, which is one of the key variables for consistent velocity and accuracy. Standard dies lock you into a fixed amount of sizing. For long-range precision work in .300 RUM, that tuning ability is a big deal.
How does the Matchmaster loading window work?
The seater die has a window on the side that lets you drop the bullet straight into the die rather than balancing it on the case mouth. Once the bullet is in, you just run the press and the free-floating, self-centering stem aligns everything for a straight seat. It speeds things up and keeps your concentricity tight.





Reviews
There are no reviews yet.