Description
The RCBS MatchMaster Full-Length Bushing Die Set is RCBS at the top of its game, combining the best traits of the old Gold Medal and Competition series into one package built for the .338 Lapua Magnum. This is a two-die set: a full-length bushing sizing die and a micrometer bullet seating die. If you're loading for long-range work or just want tighter, more repeatable groups out of your big magnum, this is the kind of tooling that gets you there.
What Makes the MatchMaster Sizing Die Different
The star of this set is the interchangeable neck bushing system in the full-length sizer. Instead of being stuck with one fixed amount of neck tension, you pick the bushing that gives you the exact neck diameter you want, which lets you fine-tune tension to your brass and load. The bushings are sold separately so you can dial in your setup. The die also uses a Titanium Carbo Nitride coated expander that cuts down on brass buildup and keeps case extraction smooth, which means less drag on your brass and longer case life.
Dialing In Seating Depth with the MatchMaster Seater
The seating die is where a lot of folks fall in love with this set. It uses a large oversized micrometer with clear, easy-to-read markings so you can make precise seating depth adjustments and get back to the same setting every time. There's also a free-floating, self-centering seating stem that helps keep bullets concentric, plus the loading window that lets you drop a bullet in and run the press without balancing it on the case mouth. It's a nice touch that saves your fingers and speeds things up.
The dies are made from case-hardened steel with interior surfaces precision drilled, reamed, and hand polished, and they run standard 7/8-14 threads so they'll thread right into any common reloading press. For the handloader who takes the .338 Lapua seriously, this set delivers the kind of fit, finish, and consistency that shows up on paper.
Key Specifications
- Manufacturer: RCBS
- Manufacturer Part Number: 16608
- UPC: 604544653878
- Caliber: .338 Lapua Magnum
- Series: MatchMaster Full-Length Bushing Die Set
- Die Type: Full-Length Bushing Sizer / Bullet Seater
- Number of Dies: 2
- Thread Size: 7/8-14
- Material: Case-Hardened Steel
- Expander: Titanium Carbo Nitride Coated
- Seater Adjustment: Oversized Micrometer
- Country of Origin: United States
What’s Included
- Full-Length Bushing Sizing Die
- Micrometer Bullet Seating Die
Frequently Asked Questions
Do neck bushings come with the MatchMaster .338 Lapua die set?
No, the neck bushings are sold separately so you can choose the exact diameter that gives you the neck tension you want. To find the right size, measure the outside neck diameter of a loaded cartridge and subtract about .002 to .003 inch to allow for brass spring back. This lets you tune tension precisely to your specific brass and load.
What dies are included in this MatchMaster set?
This is a two-die set that includes a full-length bushing sizing die and a micrometer bullet seating die. The sizer handles resizing and neck tension through the interchangeable bushing, while the seater sets bullet depth with a precise, repeatable micrometer adjustment. A shellholder is not included.
Will these MatchMaster dies fit my press?
Yes, the dies use standard 7/8-14 threads, so they'll thread into any common single-stage or turret reloading press. You'll just need the correct shellholder for the .338 Lapua Magnum case, which is sold separately.
What does the Titanium Carbo Nitride expander actually do?
The TiCN coating on the expander reduces brass buildup and gives you smoother, more consistent case extraction on every cycle. That means less drag working against your brass, which helps keep neck stretch down and extends case life. It's one of the details that makes the MatchMaster sizer run so smoothly.



Reviews
There are no reviews yet.