0
0

RCBS MatchMaster Full-Length Bushing Die Set .243 Winchester

UPC: 604544653724

$168.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The RCBS MatchMaster Full-Length Bushing Die Set in .243 Winchester is aimed at the handloader who takes neck tension and seating depth seriously. This is a two-die set: a full-length sizing die that uses interchangeable neck bushings, and a micrometer-adjustable seater die. Each die is machined from case-hardened steel with inside surfaces precision-drilled, reamed, and hand-polished, and they use the standard 7/8"-14 threads so they drop right into any common press. Worth noting up front, the neck bushings are sold separately so you can match them to your exact brass.

What the MatchMaster Sizing Die Brings to the Bench

Instead of a fixed expander ball yanking through the neck, the MatchMaster full-length sizer uses a drop-in bushing to size the neck from the outside. That lets you pick your own neck tension and keeps the brass from being overworked, which stretches case life and gives you more consistent results round to round. A titanium carbonitride expander handles the inside of the neck while cutting down on brass buildup and making case extraction smoother. To find your bushing size, measure the outside neck diameter of a loaded round and subtract about .002" to .003" for spring-back. RCBS recommends keeping bushings a size or two above and below your target so you have room to experiment.

Why the MatchMaster Seater Die Wins Over Precision Loaders

The seater is where this set really shines. It runs a micrometer adjustment with clear markings in .001" increments, so dialing in and resetting your cartridge overall length is quick and repeatable. The free-floating, self-centering seating stem keeps bullets going in straight, and the exclusive loading window means you drop the bullet in through the side and simply run the press instead of balancing it on the case mouth. For benchrest, long-range, and anyone building .243 loads where seating consistency matters, that window and micrometer combo is a genuine time-saver that pays off on the target.

Key Specifications

  • Manufacturer: RCBS
  • Manufacturer Part Number: 11408
  • UPC: 604544653724
  • Caliber: .243 Winchester
  • Die Series: MatchMaster Full-Length Bushing
  • Set Type: 2-Die Set
  • Die Material: Case-Hardened Steel
  • Thread Pattern: 7/8"-14
  • Expander: Titanium Carbonitride
  • Seater Adjustment: Micrometer, .001" Increments
  • Neck Bushings: Sold Separately
  • Shipping Weight: 1.41 lbs

What’s Included

  • MatchMaster full-length bushing sizing die
  • MatchMaster micrometer seater die with bullet loading window
  • Instruction manual

Frequently Asked Questions

Do the neck bushings come with the MatchMaster .243 die set?

No, the neck bushings are sold separately so you can match them to your specific brass. To figure out the right size, measure the outside neck diameter of a loaded cartridge and subtract about .002" to .003" to allow for brass spring-back. RCBS suggests keeping a bushing or two above and below your target diameter so you have room to fine-tune neck tension.

Will other brands of neck bushings fit this RCBS MatchMaster sizing die?

Many standard neck bushings from other precision die makers will fit, though not every one will. Plenty of reloaders have used bushings from brands like Redding in their MatchMaster dies without issue. If you already have a bushing collection, there's a good chance some will work, but checking the diameter and fit before sizing is always smart.

What makes the MatchMaster seater die different from a standard seater?

The MatchMaster seater uses a micrometer adjustment marked in .001" increments, so setting and resetting your cartridge overall length is fast and repeatable. It also has a free-floating, self-centering stem that keeps bullets seating straight. The side loading window lets you drop the bullet in and run the press, so you're not trying to balance it on the case mouth.

Is this a full-length set, and will it work in a standard reloading press?

Yes, this is a full-length bushing die set, meaning the sizer works the entire case body and neck so your brass fits any chamber. Both dies use the common 7/8"-14 thread pattern, so they install in any standard single-stage or progressive press. It pairs well with the shell holder you'd already use for .243 Winchester.

Additional information

UPC

604544653724

Manufacturer

Manufacturer Part Number

11408

Caliber/Gauge

.243 Winchester

Shipping Weight

1.41

Reviews

There are no reviews yet.

Be the first to review “RCBS MatchMaster Full-Length Bushing Die Set .243 Winchester”