0
0

RCBS Matchmaster Competition Full-Length Bushing Die Set .22 Creedmoor

UPC: 604544653663

$173.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The .22 Creedmoor is a flat-shooting, low-recoil round that rewards careful reloading, and the RCBS Matchmaster Competition Full-Length Bushing Die Set gives you the tools to feed it right. This two-die set pulls together the best bits from RCBS's Gold Medal and Competition lines into one package aimed squarely at precision and match handloaders. The full-length sizing die resizes the body and sets the shoulder while using interchangeable neck bushings to control exactly how much tension your brass puts on the bullet.

What the Matchmaster Bushing Sizer Brings to the Bench

The real draw here is control. By swapping bushings, you can tune neck tension to your load instead of settling for whatever a fixed-neck die hands you. The sizer also runs a titanium nitride coated expander, which slides through case necks smoothly, cuts down on brass buildup, and helps reduce the stretch that shortens case life. One handy detail worth knowing is the setup for bushing selection: measure the outside neck diameter of a loaded round and subtract about .002 to .003 inch to account for brass spring back. That small subtraction is what gets you consistent, repeatable tension from case to case.

Seating Depth Made Simple With the Competition Seating Die

Rounding out the set is the Matchmaster Competition seating die, and it's a genuinely clever piece. It features a bullet loading window with a retaining system, so you just drop the bullet into the window and raise the case to seat it, no balancing bullets on case mouths. Pair that with the micrometer-adjustable, free-floating, self-centering seating stem and you get seating depth adjustments you can read, record, and return to. For anyone chasing tight groups and consistent ogive measurements, that kind of repeatability is the whole point.

Both dies use the standard 7/8-14 thread and are machined in the USA. Keep in mind the neck bushings are sold separately, so you'll want to pick up the right size for your brass before your first loading session.

Key Specifications

  • Cartridge: .22 Creedmoor
  • Die Style: Full-Length Bushing Die Set
  • Number of Dies: 2
  • Die Types: Bushing Full-Length Sizer, Micrometer Bullet Seater
  • Expander: Titanium Nitride Coated
  • Seating Die: Micrometer Adjustable with Bullet Loading Window
  • Thread Size: 7/8-14
  • Neck Bushings: Sold Separately
  • Shellholder Included: No
  • Country of Origin: USA
  • Manufacturer: RCBS
  • Manufacturer Part Number: 10108
  • UPC: 604544653663

What’s Included

  • Full-length bushing sizing die
  • Matchmaster Competition micrometer seating die
  • Spare decapping stem assembly with expander ball
  • Instruction manual
  • Reloading data card
  • Storage case

Frequently Asked Questions

Does the Matchmaster .22 Creedmoor die set come with neck bushings?

No, the neck bushings are sold separately and need to be purchased to match your brass. To find the right size, measure the outside neck diameter of a loaded cartridge and subtract about .002 to .003 inch to allow for brass spring back. RCBS, Redding, and other brands offer compatible bushings, so you can pick whatever you already trust on your bench.

What makes the Matchmaster seating die different from a standard seater?

It uses a bullet loading window with a retaining system, so you drop the bullet into the window and raise the case to seat it rather than balancing the bullet on the case mouth. It also runs a micrometer-adjustable, free-floating, self-centering seating stem, which lets you set, record, and return to an exact seating depth. That combination makes it easy to keep your rounds consistent batch after batch.

Is this a full-length sizing die or a neck-only die?

This is a full-length bushing die set, meaning the sizer works the case body and sets the shoulder while the bushing controls neck tension. That makes it a strong choice for brass that gets fired in a semi-auto or any rifle where reliable chambering matters. If you ever want to skip sizing the inside of the neck, the included spare decapping stem assembly gives you that option.

Does the die set include a shellholder?

No, a shellholder is not included with this set, so you'll want the correct one for the .22 Creedmoor case head if you don't already have it on hand. The dies use the standard 7/8-14 thread, so they'll thread into any common single-stage or turret press. Both dies are machined in the USA.

Additional information

UPC

604544653663

Manufacturer

Manufacturer Part Number

10108

Shipping Weight

1.28

Reviews

There are no reviews yet.

Be the first to review “RCBS Matchmaster Competition Full-Length Bushing Die Set .22 Creedmoor”