Description
If you're running a MEC 600 Jr. Mark V and want to start loading 20 gauge hulls, this conversion die set is the clean way to get there. Instead of dedicating a second press to another gauge, you swap in the right components and your existing machine handles 20 gauge shells. It's a smart move for anyone tight on bench space who still wants the flexibility to load more than one gauge.
The set is designed specifically for the 600 Jr. Mark V family and includes everything the conversion calls for. You get the K.O. bushing, resize ring, deprime punch, reprime punch, wad guide, rammer tube, star crimp head, cam crimp assembly, shell holder, and drop tube. Parts are built from steel and aluminum, so fit and finish are what folks have come to expect from MEC gear. Complete instructions come in the box to walk you through the install, and most people have the swap done in about half an hour.
Why the 600 Jr. Mark V Die Set Makes Sense
MEC has built a reputation for shotshell presses that work for beginners learning the ropes and experienced loaders who've been at it for decades. This die set extends that same reliability to a second gauge on hardware you already own. For the 20 gauge crowd loading clays, upland, or general range ammo, it's a practical way to keep your reloading dialed in.
What to Know Before You Install the 20 Gauge Kit
This is a conversion set, not a standalone press, so you'll need a functioning 600 Jr. Mark V to use it. The components are matched to that platform and work together as a system once installed. If you're comfortable with basic shotshell reloading procedures, following the included directions and getting the machine running in 20 gauge is a straightforward afternoon project.
Key Specifications
- Manufacturer: MEC (Mayville Engineering)
- Manufacturer Part Number: 845220
- Model: 600 Jr. Mark V
- Series: Mark V Die Set
- UPC: 098489017046
- Gauge: 20 Gauge
- Product Type: Shotshell Die Set
- Material: Steel / Aluminum
- In Set: 1
- Compatibility: MEC 600 Jr. Mark V shotshell press
What’s Included
- K.O. bushing
- Resize ring
- Deprime punch
- Reprime punch
- Wad guide
- Rammer tube
- Star crimp head
- Cam crimp assembly
- Shell holder
- Drop tube
- Complete installation instructions
Frequently Asked Questions
What does the MEC 600 Jr. Mark V die set do?
It converts your existing MEC 600 Jr. Mark V shotshell press to load a different gauge, in this case 20 gauge. Rather than buying a second press, you install these matched components onto the machine you already own. It's a space-saving way to load more than one gauge on a single setup.
Does this set include a press or just the dies?
This is a conversion die set only, not a complete press. You'll need a working MEC 600 Jr. Mark V to install it on. The kit supplies all the parts and instructions needed to make the swap over to 20 gauge.
What parts come in the 20 gauge conversion kit?
The set includes the K.O. bushing, resize ring, deprime and reprime punches, wad guide, rammer tube, star crimp head, cam crimp assembly, shell holder, and drop tube. Complete instructions are packed in as well. These are the components needed to run the press in 20 gauge.
How long does the conversion take to install?
Most people get the swap done in about 30 minutes by following the included directions. If you're comfortable with basic shotshell reloading procedures, it's a straightforward job. Take your time lining everything up and the press will be ready to load 20 gauge.





Reviews
There are no reviews yet.