Description
If your reloads are hanging up at the chamber or giving your semi-auto trouble, the culprit is usually a swollen brass base. The MEC Super Sizer tackles that one job and does it well. This is the 20 gauge model, built around MEC's exclusive Power-Ring collet, where eight steel fingers wrap around the base of the hull and squeeze with even pressure until the brass is pushed back to its original factory diameter. The result is a shell that slides into the chamber and drops right back out, every time.
The frame is solid steel and bolts right to your bench, and all the hardware you need to mount it comes in the box. Setup is simple once you dial in the collet adjustment to the diameter you want. Plenty of reloaders use it as the first step in their process, running hulls through the Super Sizer before they ever hit station one on their progressive or single-stage press. It handles both high brass and low brass 20 gauge hulls and accepts all shell lengths, so you aren't boxed into one load.
Why Reloaders Keep a Super Sizer on the Bench
A lot of conventional presses either don't resize at all or don't bring the brass down far enough, especially on steel-head club hulls. That's exactly where this tool earns its keep. The MEC Super Sizer gives you a dedicated, repeatable resize that the best of your other equipment may not, which is why it's a go-to for folks shooting tight-chambered guns and fixed-breech shotguns.
Dialing In the MEC Super Sizer
The collet adjusts so you can set exactly how much you bring the brass down, and the handle stop lets you repeat the same stroke on every hull. Measure a resized shell, check it against the barrel you plan to shoot, and adjust until it chambers clean. Once it's set, it's a quick pull of the handle per shell and you're on to the next one. For anyone chasing reliable feeding and consistent brass, it's a straightforward addition to a reloading setup.
Key Specifications
- Manufacturer: MEC (Mayville Engineering Co.)
- Model: Super Sizer
- Gauge: 20 Gauge
- Resizing System: Power-Ring collet, eight steel fingers
- Material: Steel frame and hardware
- Mounting: Bench mountable
- Hull Compatibility: High and low brass, all shell lengths
- Type: Dedicated shotshell sizer
- Manufacturer Part Number: 811920
- UPC: 098489016209
- Shipping Weight: 5.2188 lbs
What’s Included
- MEC Super Sizer 20 gauge
- Power-Ring collet resizing device
- Mounting hardware
Frequently Asked Questions
Is the MEC Super Sizer gauge specific?
Yes, this one is set up for 20 gauge and the collet is matched to that gauge. MEC offers the Super Sizer in other gauges separately, so you'll want a dedicated unit for each gauge you reload. The adjustment lets you fine-tune how far the brass is sized down within that gauge.
What does the Power-Ring collet actually do?
The Power-Ring is MEC's eight-finger steel collet that encircles the base of the hull and applies even pressure all the way around. That brings the brass head back to its original factory diameter so the shell chambers and feeds without hanging up. It's the same resizing system found on MEC's Sizemaster and Steelmaster presses.
Why would I need a Super Sizer if my press already resizes?
Some conventional and progressive presses don't resize at all, and others don't bring steel-head or club hulls down far enough. Running shells through the Super Sizer first solves feeding and chambering problems, which is especially handy for semi-autos and tight-chambered guns. Many reloaders use it as a dedicated first step before loading.
How do I set the MEC Super Sizer correctly?
Mount it to your bench, then adjust the collet to the diameter you want and set the handle stop so every stroke is the same. Measure a resized hull and test it in the barrel you plan to shoot. If it slides in and drops out cleanly, you're sized enough.




Reviews
There are no reviews yet.