0
0

MEC 8452 600 Jr. Mark V Die Set – 28 Gauge Conversion Kit

UPC: 098489015080

$126.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you already run a MEC 600 Jr. Mark V and want to add 28 gauge to your loading bench, this is the kit that gets you there. The 8452 die set bolts onto your existing press and handles the full job of switching gauges, so there's no need to hunt down loose parts one at a time. It's built for the Mark V single stage platform specifically, which matters since MEC changed the die design over the years and the 8452 series is the current style.

What the 600 Jr. Mark V 28 Gauge Set Covers

The conversion includes the full lineup of tooling you need to run the smaller hull: resize ring, deprime and reprime punches, wad guide, rammer tube, star crimp head, cam crimp assembly, and the shell holder drop tube, along with the K.O. bushing. Detailed instructions come in the box too, which helps if this is your first time pulling one gauge off and setting another up.

Why Reloaders Reach for the 8452 Die Set

28 gauge factory ammo can be scarce and pricey, which is exactly why folks load their own. Running your own hulls lets you dial in loads for skeet, sporting clays, or light field work on quail and dove, and the 600 Jr. has a long reputation for cranking out consistent, reliable shells once it's set up right. Most people report the physical parts swap takes somewhere in the 10 to 30 minute range. Getting the crimp dialed in takes a little patience the first time, but once it's tuned, the press just runs.

A Note Before You Order

This is a die set, not a complete press, so you'll need to already own a 600 Jr. Mark V to use it. One thing worth knowing: if your press has the auto-primer feed, you may need the separate primer seating die for that setup. Folks who load more than one gauge regularly often keep a second press rather than swapping back and forth, but for adding 28 gauge to a single machine, this set has you covered.

Key Specifications

  • Manufacturer: MEC
  • Model: 600 Jr. Mark V
  • Manufacturer Part Number: 845228
  • UPC: 098489015080
  • Gauge: 28 Gauge
  • Product Type: Shotshell Die Set
  • Fits: MEC 600 Jr. Mark V Single Stage Press
  • Press Type: Single Stage
  • Pieces In Set: 1 set
  • Country of Origin: United States

What’s Included

  • K.O. bushing
  • Resize ring
  • Deprime punch
  • Reprime punch
  • Wad guide
  • Rammer tube
  • Star crimp head
  • Cam crimp assembly
  • Shell holder drop tube
  • Instructions

Frequently Asked Questions

Does this MEC 8452 die set come with a complete press?

No, this is a gauge conversion die set only, not a complete reloader. It's made to convert a 600 Jr. Mark V press you already own over to 28 gauge. You'll need the base press on hand to put these parts to use.

Will this set fit any MEC 600 Jr.?

The 8452 series is designed for the 600 Jr. Mark V, which is the newer style of the press. MEC changed its die design over the years, so older pre-1983 presses used a different part number. If you have a Mark V, this is the correct set.

How long does the 28 gauge conversion take?

Most people report the physical parts swap runs about 10 to 30 minutes once you're familiar with the press. Dialing in the crimp to get clean, consistent shells usually takes a bit of extra time the first go around. After it's tuned, the press runs smoothly.

Do I need anything else to use the 600 Jr. Mark V 28 gauge die set?

The set includes the tooling and instructions needed for the standard conversion. If your press is equipped with the auto-primer feed, you may need to pick up the separate primer seating die for that configuration. Beyond that, you'll just need your usual 28 gauge components like hulls, wads, shot, powder, and primers.

Additional information

UPC

098489015080

Manufacturer

Manufacturer Part Number

845228

Caliber/Gauge

28 Ga

Product Type

Shotshell Die Set

Reviews

There are no reviews yet.

Be the first to review “MEC 8452 600 Jr. Mark V Die Set – 28 Gauge Conversion Kit”