Description
The MEC 600 Jr. Mark 5 has earned its reputation the right way, over decades of real use at the bench. It's a single-stage shotshell press set up for 28 gauge, and it's the kind of tool that makes sense whether you're brand new to rolling your own or you've been at it for years. 28 gauge factory ammo can be pricey and tough to find on the shelf, so a press like this pays for itself over time while letting you dial in loads exactly how you like them.
What Sets the 600 Jr. Mark 5 Apart
The heart of this press is its cam-action crimp die, which returns each hull to its original shape and gives you a clean, tight finish. The one-piece Spindex crimp starter swivels to find the original folds in the shell, so your crimps line up correctly every time instead of fighting the hull. It's set at the factory for 2-3/4 inch shells and adjusts up to 3 inch without needing extra parts, and the steel frame holds everything in solid alignment load after load.
Loading Speed and Daily Use
A steady operator can run through roughly four to six boxes an hour, which comes out to around 150 to 200 shells, depending on your rhythm. Priming is built right into the press, and if you want to speed things up down the road you can add the 285 CA primer feed so you're not handling each primer by hand. The compound leverage design keeps the effort low, which matters when you're settling in for a long session.
Setting Up Your 600 Jr. Mark 5 for 28 Gauge
This configuration ships ready for 28 gauge with a 3/4 ounce charge bar and three powder bushings, numbers 14, 16, and 21, covering a solid spread of common recipes. If you ever want to run a different gauge, MEC offers die sets so you can convert the press rather than buying a whole new machine. It's a practical, long-lasting setup for anyone loading 28 gauge for sporting clays, skeet, upland hunting, or plain old range time.
Key Specifications
- Manufacturer: MEC
- Model: 600 Jr. Mark 5
- Manufacturer Part Number: 844728
- UPC: 098489011419
- Gauge: 28 Gauge
- Press Type: Single-Stage Shotshell Reloader
- Frame Material: Steel
- Shell Length: Factory set for 2-3/4 inch, adjustable to 3 inch
- Charge Bar: 3/4 oz. (lead shot)
- Powder Bushings Included: 14, 16, 21
- Loading Rate: Approx. 4 to 6 boxes per hour (150 to 200 shells)
- Priming: Built-in, upgradeable with 285 CA primer feed (sold separately)
- Crimp System: Cam-action crimp die with Spindex crimp starter
- Thread Pattern: Multi-Size
- Holes: 1
What’s Included
- MEC 600 Jr. Mark 5 single-stage reloading press (28 gauge)
- 3/4 oz. charge bar
- Three powder bushings (14, 16, 21)
Frequently Asked Questions
What comes with the MEC 600 Jr. Mark 5 for 28 gauge?
This 28 gauge press ships with a 3/4 ounce charge bar and three powder bushings, numbers 14, 16, and 21. That spread covers a good range of common 28 gauge load recipes right out of the box. Priming is built into the press, so you can start loading without buying anything extra.
Can the 600 Jr. Mark 5 load 3 inch shells?
Yes. It comes set from the factory for 2-3/4 inch shells and adjusts up to 3 inch without needing any additional parts. That gives you flexibility across the common 28 gauge hull lengths.
How fast can I reload with this press?
A steady operator can run roughly four to six boxes an hour, which works out to about 150 to 200 shells. It's a single-stage press, so you complete one operation per pull of the handle. If you want to pick up the pace, you can add the 285 CA primer feed so you're not handling each primer individually.
Can I convert the 600 Jr. Mark 5 to another gauge later?
You can. MEC offers die sets that let you convert the press to a different gauge instead of buying a whole new machine. This 844728 model is dedicated to 28 gauge as it ships, and the die kits are sold separately.



Reviews
There are no reviews yet.