0
0

MEC 502-078 Charge Bar – 7/8 oz Lead Shot for Progressive Presses

UPC: 098489011396

$24.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The MEC 502-078 charge bar is the 7/8 oz lead shot bar built for MEC progressive shotshell presses. In MEC's naming system, the "502" tells you it's a progressive-series bar and the "78" means it meters 7/8 ounce of shot, so you know exactly what you're grabbing before it ever hits the press. It's a straightforward, purpose-built part that handles one job and does it well: dropping a repeatable volume of lead every single pull.

Functionally, the bar meters your powder by volume as the charge drops into the hull, then measures the shot that goes into the wad column. Powder charge is set using removable MEC powder bushings, which are sold separately, so you can fine-tune your load without swapping the whole bar. The body is anodized aluminum with a soft insert designed to cut down on shot shearing, which matters most when you're running harder lead or larger shot sizes. That little insert is the difference between a clean drop and crushed pellets gumming up your charges.

Why the 502-078 Is a Skeet and Clays Favorite

The 7/8 oz load has a loyal following among skeet and sporting clays shooters for a reason. You get noticeably softer recoil through a round compared to heavier payloads, while still putting enough lead downrange to break targets cleanly. For high-volume target reloaders, a dedicated 7/8 oz bar keeps your lighter loads consistent without constantly re-tuning.

Fitting the MEC 502-078 to Your Press

This is a lead shot bar for progressive machines, which covers presses like the 650, Grabber, and 9000. One important note worth repeating: lead and steel shot bars are not interchangeable, so make sure you're matching this lead bar to lead shot. If you run a single-stage MEC, you'd want the 302-series equivalent instead. For the right progressive setup, the 502-078 is a simple, durable upgrade that earns its spot in the loading room.

Key Specifications

  • Manufacturer: MEC
  • Manufacturer Part Number: 50278
  • UPC: 098489011396
  • Product Type: Charge Bar
  • Series: 502 (Progressive)
  • Shot Payload: 7/8 oz
  • Shot Type: Lead
  • Material: Anodized Aluminum
  • Color: Red
  • Caliber/Gauge: Shotshell
  • Length: 6.4 in
  • Quantity: 1
  • Press Compatibility: MEC progressive presses (650, Grabber, 9000)
  • Soft Insert: Yes, reduces shot shearing

What’s Included

  • 1 MEC 502-078 progressive charge bar (7/8 oz lead shot)

Frequently Asked Questions

Which MEC presses does the 502-078 charge bar fit?

The 502 series is MEC's progressive lineup, so this bar works across MEC progressive presses including the 650, Grabber, and 9000. It will not fit single-stage MEC presses, which use the 302 series instead. If your machine loads multiple shells at once, it's a progressive and this bar is the right family.

Does the MEC 502-078 come with powder bushings?

No, powder bushings are sold separately. The charge bar meters your shot at 7/8 oz, and you set your powder charge by installing the removable MEC powder bushing that matches your recipe. This lets you tune different powder loads without replacing the whole bar.

Can I use this lead charge bar with steel shot?

No. Lead and steel shot charge bars are not interchangeable, and this 502-078 is built specifically for lead shot. Running the wrong bar type can cause problems with your charges and your press, so match a lead bar to lead shot and a steel bar to steel shot.

Why would I choose a 7/8 oz bar for target loads?

The 7/8 oz payload is a go-to for skeet and sporting clays because it trims recoil noticeably while still carrying enough lead to break targets cleanly. A dedicated 7/8 oz bar keeps those lighter loads repeatable round after round. It's a popular pick for high-volume target reloaders.

Additional information

UPC

098489011396

Manufacturer

Manufacturer Part Number

50278

Caliber/Gauge

Shotshell

Color

RED

Length

6.4000

Product Type

Charge Bar

Quantity

1

Reviews

There are no reviews yet.

Be the first to review “MEC 502-078 Charge Bar – 7/8 oz Lead Shot for Progressive Presses”