Description
If there's one bullet that defines .308 precision reloading, it's the Sierra 168gr MatchKing. This hollow point boat tail has earned its reputation on target lines across the country, and it remains one of the most recognized match projectiles made. Loaders building for high power, F-Class, or just chasing tight groups out of a bolt gun keep reaching for this one because it simply performs when you do your part.
What Makes the Sierra MatchKing 168gr Tick
Accuracy drives everything in this bullet's design. The jackets are drawn thin and held to an exacting concentricity standard, and bullet weight is controlled tightly from one projectile to the next. That consistency is what shows up on paper when you're fine tuning a load. The small meplat and boat tail base work together to push the ballistic coefficient up and keep the bullet stable downrange, giving you a flat trajectory and solid resistance to crosswind drift.
Dialing In the .308 MatchKing
This is a .30 caliber projectile at .308 inch diameter, weighing 168 grains with a sectional density of .253. The G1 ballistic coefficient steps across velocity bands, running .462 above 2600 fps, .447 between 2600 and 2100 fps, .424 between 2100 and 1600 fps, and .405 below that. Overall bullet length is right around 1.215 inches. It shoots well out of common twist rates, and it's a natural fit for the .308 Winchester along with other .30 caliber cartridges. A lot of reloaders cut their long range teeth developing loads around this exact bullet.
Why a 500 Count Box Earns Its Spot
Buying in the 500-count box means fewer trips to restock and plenty of components for load workups and match seasons. Keep in mind these are component bullets for handloading, not loaded ammunition, so you'll need your own brass, powder, and primers to finish them. For anyone serious about wringing accuracy out of a .30 cal rifle, this MatchKing is a proven place to start.
Key Specifications
- Manufacturer: Sierra
- Series: MatchKing
- Manufacturer Part Number: 2200C
- UPC: 092763522004
- Caliber: .30 Caliber
- Bullet Diameter: .308 in
- Bullet Weight: 168 Grain
- Bullet Type: Hollow Point Boat Tail (HPBT)
- Sectional Density: .253
- Ballistic Coefficient (G1): .462 @ 2600 fps and above
- Overall Length: 1.215 in
- Core Material: Lead
- Quantity: 500 per Box
- Country of Origin: USA
What’s Included
- 500 Sierra MatchKing .30 Cal (.308) 168gr HPBT component bullets
Frequently Asked Questions
Are these Sierra MatchKing 168gr HPBT loaded rounds or just bullets?
These are component bullets only, not loaded ammunition. You'll need to supply your own brass, powder, and primers to assemble finished cartridges. They're intended for reloaders building their own precision loads.
What cartridges work with the .308 168gr MatchKing?
This .308 inch diameter bullet is a classic fit for the .308 Winchester and works across a wide range of .30 caliber cartridges, including the .30-06 and various .300 magnums. Reloaders have used it in just about everything that takes a .30 cal projectile. Published load data is widely available for this exact bullet.
What twist rate do I need to stabilize the 168gr MatchKing?
A 1-in-12 twist handles this 168 grain bullet well in .308 and is a common pairing on the range. Slightly faster twists like 1-in-10 or 1-in-11 also stabilize it with no trouble. Most factory .308 barrels will shoot it without issue.
Is the Sierra 168gr MatchKing good for hunting?
Sierra designed the MatchKing line specifically for target and competition use, and that's where it shines. While some shooters have used them in the field, the manufacturer recommends them for target shooting rather than hunting. For precision match work it's one of the most trusted bullets out there.





Reviews
There are no reviews yet.