Description
The Sierra MatchKing 1575C is the heavy-hitter of the 6mm target lineup. Introduced back in December 2016, this 110-grain hollow point boat tail was built from the ground up for extreme long-range work, and it quickly earned a spot on the loading bench of anyone shooting a fast-twist 6mm. With a .243 diameter, a sectional density of .266, and a published G1 ballistic coefficient of .617 at 2600 fps and above, it's one of the slicker 6mm match pills Sierra has ever put out.
What Makes the 1575C MatchKing Shoot
Sierra uses a sleek 27-caliber elongated ogive paired with a final meplat-reducing step, often called pointing, to squeeze every bit of ballistic coefficient out of the design. That translates to better wind resistance and velocity retention, which is exactly what you want when the target is way out there. The bearing surface to ogive junction uses a 1.5-degree angle that matches the throat geometry found in many match chambers, so you get clean, repeatable bullet-to-bore alignment every time you seat one.
Build Quality You Can Count On
Like every MatchKing, accuracy drives the whole design. The jackets are drawn to an exacting concentricity standard of 0.0003 inch maximum variation, and weight is held to within plus or minus 0.3 grain. That kind of consistency is the quiet reason these bullets group the way they do. The jacket is copper over a lead core, standard MatchKing construction that handloaders have trusted for decades.
Spinning the 110gr 6mm MatchKing Correctly
This is the big one to get right. The 110-grainer is long and heavy for the caliber, so Sierra calls for a true 1:7 inch twist or faster to stabilize it properly. Run it in a 1:8 or slower barrel and you won't see what this bullet can do. Pair it with the right twist and a worked-up load, though, and it's a standout for long-range target and competition use. Worth noting that MatchKing bullets are designed for paper and steel, not recommended for most hunting applications.
Key Specifications
- Manufacturer: Sierra
- Manufacturer Part Number: 1575C
- UPC: 092763515754
- Series: MatchKing / Rifle Target
- Bullet Caliber: 6mm
- Bullet Diameter: .243
- Bullet Weight: 110 grain
- Bullet Type: Hollow Point Boat Tail (HPBT)
- Jacket Material: Copper
- Core Material: Lead
- Sectional Density: .266
- G1 Ballistic Coefficient: .617 @ 2600 fps and above
- Recommended Twist Rate: 1:7 inch or faster
- Quantity: 500 Per Box
- Application: Match / Range / Target
What’s Included
- 500 Sierra MatchKing 1575C 6mm 110gr HPBT bullets
Frequently Asked Questions
What twist rate do I need for the Sierra MatchKing 1575C 110gr 6mm?
Sierra calls for a true 1:7 inch twist barrel or faster to properly stabilize this 110-grain bullet. It's long and heavy for the caliber, so slower twists like 1:8 won't keep it stable in flight. Match the right twist and you'll get the accuracy this bullet is known for.
Are these MatchKing bullets good for hunting?
No, these are target projectiles through and through. Sierra specifically notes that MatchKing bullets are not recommended for most hunting applications, since the design is built for precision on paper and steel rather than reliable terminal performance on game. Stick with them for competition and long-range target work.
What's the ballistic coefficient on the 1575C MatchKing?
The published G1 ballistic coefficient is .617 at 2600 fps and above, which is impressive for a 6mm bullet. It steps down to .605 between 1900 and 2600 fps and .580 below 1900 fps. That high BC is what gives it strong wind resistance and velocity retention at distance.
Is this loaded ammunition or a component bullet?
This is a component bullet only, meant for handloading. There's no powder, primer, or brass included, so you'll need the rest of your reloading components to assemble a finished cartridge. These are a popular choice for folks building precision 6mm loads.




Reviews
There are no reviews yet.