Description
The Sierra Tipped MatchKing in 6.5mm (.264) takes the proven MatchKing profile and adds an acetal resin tip to sharpen the nose and tighten up the drag numbers. At 130 grains with a G1 ballistic coefficient of .518 and a G7 of .262, this bullet holds velocity downrange and bucks wind better than a lot of what else is sitting in the 6.5mm bin. The box holds 100 projectiles ready to load into your favorite 6.5 Creedmoor, 6.5 PRC, 260 Rem, or other .264 chambering.
What the Tip Does on the 6.5mm TMK
The polymer tip isn't just for looks. It smooths out the meplat from bullet to bullet, which means more consistent drag and a BC you can count on across a whole box. The tip also keeps the nose from getting dinged up in a magazine, so feeding from a box mag stays smooth round after round. That acetal resin construction over the copper jacket and lead core is what crowns the TMK line as the slickest version of the MatchKing.
Loading the Sierra 130gr Tipped MatchKing
This one likes to spin. Sierra lists a 1×8 inch twist or faster to properly stabilize the 130-grain TMK, so check your barrel before you start working up a load. The spitzer boat tail design and sectional density of .266 give it the shape and heft to carry energy out past where lighter bullets start falling off. Reloaders running 6.5 Creedmoor and similar cartridges have made this a go-to for match work and precision rifle setups.
Where the 6.5 TMK Shines
Introduced back in 2015, this bullet earned its spot on the loading bench for target shooting, long-range competition, and ringing steel at distance. While some folks reach for MatchKing bullets on varmints, they aren't designed to give the explosive expansion you'd get from a dedicated varmint or hunting projectile, so keep these in the match and target lane where they belong. If you want a high-BC 6.5mm bullet that rewards careful load development, the Tipped MatchKing is hard to beat.
Key Specifications
- Manufacturer: Sierra
- Manufacturer Part Number: 7430
- UPC: 092763074305
- Bullet Caliber: 6.5mm (.264)
- Bullet Diameter: 0.264 in
- Bullet Weight: 130 grain
- Bullet Type: Tipped MatchKing (TMK) Spitzer Boat Tail
- Tip Material: Acetal Resin Polymer
- Jacket Material: Copper
- Core Material: Lead
- G1 Ballistic Coefficient: .518 at 2200 fps and above
- G7 Ballistic Coefficient: .262
- Sectional Density: .266
- Recommended Twist Rate: 1×8 inches or faster
- Quantity: 100 Per Box
What’s Included
- 100 Sierra 130gr Tipped MatchKing 6.5mm (.264) bullets
Frequently Asked Questions
What twist rate does the Sierra 6.5mm 130gr Tipped MatchKing need?
Sierra recommends a barrel twist rate of 1×8 inches or faster to properly stabilize this 130-grain bullet. Most modern 6.5 Creedmoor and 6.5 PRC barrels come with an 8-twist or faster, so you're usually covered. If you're running a slower twist, check your stabilization before committing to a load.
Can I load the 130gr Tipped MatchKing in 6.5 Creedmoor?
Yes. The .264 diameter and 130-grain weight make it a popular choice for 6.5 Creedmoor, and it works equally well in 260 Remington, 6.5 PRC, and other 6.5mm chamberings. These are component bullets, so you'll be loading them into your own brass with your preferred powder and primer.
Is the Sierra Tipped MatchKing a good hunting bullet?
This is a match and target bullet first and foremost. While MatchKing and Tipped MatchKing bullets are sometimes used on varmints, they aren't designed to deliver the reliable explosive expansion you'd get from a dedicated hunting or varmint projectile. For precision target work and long-range competition, it's a top performer.
What does the polymer tip do on the 6.5mm TMK?
The acetal resin tip sharpens the nose profile, which cuts drag and bumps up the ballistic coefficient to a flat-shooting .518. It also keeps the meplat consistent from bullet to bullet for more predictable results downrange. On top of that, the tip protects the nose and helps the rounds feed reliably from magazine-fed rifles.


Reviews
There are no reviews yet.