Description
The Sierra MatchKing 6mm (.243) 70 grain HPBT is one of the names that built Sierra's reputation on the firing line. Introduced back in 1974, the #1505 was designed specifically for record-breaking accuracy and quickly became the bullet to beat in centerfire competition out to 400 yards. If you reload for a 6BR, 6PPC, .243 Winchester, or any other 6mm chambering, this is a projectile that has earned its spot in a lot of winning loads.
The secret here is consistency. Every MatchKing starts with a very thin jacket drawn to an exacting concentricity standard, with weight held to a tight tolerance from one bullet to the next. That attention to uniformity is what translates into those tiny groups people chase at the bench. With a sectional density of .169 and a G1 ballistic coefficient right around .259, the 70 grain spitzer carries well through the mid ranges where this weight shines.
What Sets the 70 Grain MatchKing Apart
The design combines a hollow point with a very small meplat and a boat tail base. The tiny meplat keeps the BC up front while the tapered boat tail cuts drag at the rear, so the bullet bleeds less velocity downrange and stays more forgiving in wind. It is a lightweight 6mm pill, which means it loves faster twist rates less than the heavier match bullets do and plays nicely with a wide range of 6mm barrels.
Loading the Sierra MatchKing #1505
This one is a true target bullet. Sierra built it as a bench rest projectile, and it is a favorite for NRA half-size silhouettes and short to mid-range precision work. Keep in mind the MatchKing line is designed for paper and steel rather than hunting, since the thin jacket is not built for reliable expansion on game. For load development and match day, though, it is tough to beat the value of a box of 100 that groups this well.
Key Specifications
- Manufacturer: Sierra
- Manufacturer Part Number: 1505
- UPC: 092763015056
- Bullet Caliber: 6mm (.243)
- Bullet Diameter: .243 inch
- Bullet Weight: 70 Grains
- Bullet Type: Hollow Point Boat Tail (HPBT)
- Series: MatchKing Rifle Target
- Ballistic Coefficient (G1): 0.259
- Sectional Density: 0.169
- Cannelure: No
- Jacket Material: Copper
- Core Material: Lead
- Recommended Usage: Target / Match
- Quantity: 100 Per Box
What’s Included
- 100 Sierra MatchKing 6mm (.243) 70gr HPBT bullets (#1505)
Frequently Asked Questions
What is the ballistic coefficient of the Sierra MatchKing 6mm 70gr HPBT?
The #1505 carries a G1 ballistic coefficient right around .259 at higher velocities. It also has a sectional density of .169. For a 70 grain 6mm bullet, that keeps it carrying well through the short and mid ranges this weight was built for.
What calibers can I load the Sierra 70gr MatchKing in?
Any 6mm chambering that uses a .243 inch diameter bullet will work, including .243 Winchester, 6BR, 6PPC, and similar rounds. It has long been a popular benchrest and silhouette choice. Reloaders running those cartridges tend to have very good luck with it.
Is the Sierra MatchKing 70gr a good hunting bullet?
Sierra recommends the MatchKing line for target shooting rather than hunting. The thin match jacket is built for accuracy, not for the reliable, consistent expansion you want on game. If hunting is the goal, a dedicated hunting bullet is the better pick.
How many bullets come in this box?
This listing is for a box of 100 Sierra MatchKing 6mm 70 grain HPBT bullets. These are component projectiles for reloading, so you will supply your own brass, primers, and powder. The 100 count is a handy size for load development and match practice.





Reviews
There are no reviews yet.