Description
The Sierra MatchKing .224 69 grain HPBT is one of the most trusted target bullets in the .22 caliber world, and for good reason. It was built for Service Rifle competition in the M16A2 and AR-15A2 platforms, and it has set an impressive stack of national records over the years. The hollow point boat tail profile with its small meplat keeps the ballistic coefficient high at 0.301 and the trajectory flat, so this bullet holds its own at 200, 300, and on out to longer distances when the wind picks up. These are component bullets for handloading, not loaded ammunition.
What Makes the 69 Grain MatchKing Shoot So Well
Accuracy is the whole point of the MatchKing design, and Sierra backs that up with manufacturing you can feel on the bench. The jackets are drawn very thin to a concentricity standard of 0.0003 inch maximum variation, and weight is held to within plus or minus 0.3 grain. That kind of consistency from bullet to bullet is what lets a good load print tight groups box after box. The sectional density sits at 0.196, which helps this 69 grain pill carry energy and buck wind better than the lighter .224 options.
Loading the Sierra .224 69 gr HPBT
This is a heavy-for-caliber bullet, so barrel twist matters. Sierra calls for a rifling twist of 1×10 inches or faster to stabilize it properly, and plenty of handloaders report excellent results in 1:9, 1:8, and faster twist barrels. In a slower twist it won't stabilize, so check your barrel before you start working up a load. It's a favorite across .223 Remington, .22-250, .224 Valkyrie, and other .224 chamberings, with load data available in just about every reloading manual.
Target Work, Not Hunting
Sierra recommends the MatchKing line strictly for target shooting and competition rather than hunting. If paper, steel, and match results are your game, this bullet has earned its reputation one record at a time.
Key Specifications
- Manufacturer: Sierra
- Model: MatchKing
- Manufacturer Part Number: 1380
- UPC: 092763013809
- Caliber: .22 Caliber
- Bullet Diameter: .224 inches
- Bullet Weight: 69 grains
- Bullet Type: Hollow Point Boat Tail (HPBT)
- Jacket Material: Copper
- Core Material: Lead
- Cannelure: No
- Ballistic Coefficient: 0.301
- Sectional Density: 0.196
- Recommended Twist Rate: 1×10 inches or faster
- Quantity: 100 Per Box
- Country of Origin: USA
What’s Included
- 100 Sierra MatchKing .224 69 grain HPBT component bullets
Frequently Asked Questions
What twist rate do I need for the Sierra MatchKing .224 69 gr HPBT?
Sierra recommends a barrel twist rate of 1×10 inches or faster to stabilize this 69 grain bullet. Many handloaders run it successfully in 1:9, 1:8, and faster twists with excellent results. If your barrel has a slower twist than 1:10, this bullet won't stabilize properly, so confirm your rifling before working up a load.
Is the Sierra 69 grain MatchKing loaded ammunition or a component bullet?
These are component bullets intended for handloading, not loaded ammunition. You'll need brass, primers, powder, and the appropriate dies to assemble finished cartridges. Load data for the .224 69 grain MatchKing is widely available across common chamberings like .223 Remington and .22-250.
Can I use the .224 69 gr MatchKing for hunting?
Sierra designed the MatchKing line for target shooting and competition and recommends it for those uses rather than hunting. The thin jacket and hollow point are built for accuracy and consistency on paper and steel. If you're after a dedicated hunting projectile, look to a bullet designed for terminal performance instead.
What makes the Sierra MatchKing more accurate than standard bullets?
The accuracy comes from tight manufacturing tolerances. The jackets are drawn to a concentricity standard of 0.0003 inch maximum variation and weight is held to within plus or minus 0.3 grain. Combined with the hollow point boat tail shape and small meplat, that consistency is what gives this bullet its reputation for record-setting groups.





Reviews
There are no reviews yet.