0
0

Hornady ELD-X Seating Stem .338 Cal 230gr for Custom Grade Dies

UPC: 090255971378

$15.99

7 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anyone who has loaded sleek, high-BC bullets in a standard seating die knows the headache: you pull a round out and the tip looks mashed, or there's a ring pressed into the ogive. This .338 caliber, 230 grain ELD-X seating stem solves that. It's cut to match the exact profile of the ELD-X bullet so the stem contacts the bearing surface the way it should, keeping the polymer tip and jacket intact round after round.

The benefit here is consistency. When a stem seats off the correct point on the ogive, you get repeatable seating depth and better alignment, which is exactly what you're chasing with a premium hunting bullet like the ELD-X. No marred tips, no odd contact rings, just straight bullets seated where you want them.

How the ELD-X Seating Stem Fits Your Setup

This stem is built specifically for Hornady Custom Grade dies. Installation is about as simple as reloading gets: back out the standard seating stem already in your die and thread this one in its place. No tools beyond what's already on your bench, and you're ready to run. Keep in mind it's made to work with Hornady Custom Grade seating dies and is not designed to drop into other brands' equipment.

Matched to the .338 230gr ELD-X

The ELD-X is a long, aerodynamic bullet, and that sleek nose is the whole reason a dedicated stem matters. A general-purpose stem can bite the tip or contact too high on the nose. This one is machined around the 230 grain .338 ELD-X profile, so it cradles the bullet correctly during the seating stroke. If you're loading .338 cartridges with this bullet and want your tips to look as good coming out of the die as they did going in, this is the stem that gets you there. It's a small part, but it makes a real difference in the finished round.

Key Specifications

  • Manufacturer: Hornady
  • Caliber: .338 (0.338 in diameter)
  • Bullet Weight: 230 grain
  • Bullet Type: ELD-X (Spitzer Boat Tail)
  • Fits: Hornady Custom Grade Seating Dies
  • Compatibility: Not compatible with other manufacturers' dies
  • Quantity: 1 stem
  • Manufacturer Part Number: 397137
  • UPC: 090255971378
  • Warranty: Hornady No-Risk Lifetime Warranty

What’s Included

  • 1 Hornady ELD-X seating stem (.338 caliber, 230 grain)

Frequently Asked Questions

Will this ELD-X seating stem work in my existing Hornady .338 die?

Yes, as long as it's a Hornady Custom Grade seating die. You just remove the standard stem that came in your die and thread this one in its place. It is not designed to fit dies from other manufacturers.

Why do I need a dedicated stem for the 230gr ELD-X?

The ELD-X has a long, sleek ogive and a polymer tip, and a standard stem can flatten the tip or press a ring into the nose during seating. This stem is machined to match the ELD-X profile so it contacts the right spot on the bullet. The result is cleaner, more consistent seating with no damage to the tip or jacket.

Does this stem change my seating depth adjustment?

It swaps directly for your existing seating stem and works with your die's normal depth adjustment. After installing it, you'll want to confirm your seating depth with a few test rounds since the contact point on the bullet is different from a standard stem. Once it's dialed in, it holds that setting like any other stem.

Can I use this stem with other .338 bullets besides the ELD-X?

It's cut specifically for the .338 230 grain ELD-X profile, so that's where it performs best. Bullets with a similar ogive may seat acceptably, but you could see different contact or marking on a bullet with a different nose shape. For other Hornady designs like A-Tip or FTX, there are stems matched to those profiles.

Additional information

UPC

090255971378

Manufacturer

Manufacturer Part Number

397137

Shipping Weight

0.02

Reviews

There are no reviews yet.

Be the first to review “Hornady ELD-X Seating Stem .338 Cal 230gr for Custom Grade Dies”