Description
If you've ever pulled a loaded round out of your Hornady die and noticed a little ring pressed into the tip of your ELD bullet, this is the part that fixes it. The standard seating stem that ships in most dies is cut for a more general bullet profile, and the sleek, long-ogive shape of Hornady's ELD-X and ELD Match bullets doesn't always line up with it. This stem is machined specifically to cradle that 6.5mm ELD nose, contacting the bullet lower on the ogive so it seats straight and comes out looking the way it went in.
It's built to drop right into Hornady Custom Grade dies (also sold under the New Dimension name) and works with the 6.5mm .264 caliber ELD family, including the 143 grain ELD-X and the 147 grain ELD Match. Keep in mind it's made to pair with Hornady dies and isn't designed for other brands' seating dies.
Why the ELD Seating Stem Shape Matters
Seating stems are one of those small details that separate good handloads from great ones. When the stem matches the bullet profile, it pushes on a broader, better-aligned contact patch instead of pressing on the delicate polymer tip. That means less deformation, more uniform seating depth round to round, and tighter concentricity, all of which show up on paper when you're chasing small groups in 6.5 Creedmoor, 6.5 PRC, or any of the 6.5 wildcats.
Getting the Most From This 6.5mm Stem
Swapping it in is quick: back out your seating adjustment, unscrew the old stem, thread this one in, and re-set your seating depth. Reloaders who run the long, heavy-for-caliber ELD bullets tend to notice the difference right away, with cleaner bullet tips and more consistent readings on a comparator. It's an inexpensive upgrade that earns its keep if you're loading match or hunting ammo with Hornady's ELD projectiles.
Made in the USA and backed by Hornady, it's a simple fix for a common reloading annoyance.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397130
- UPC: 090255971309
- Caliber: 6.5mm (.264)
- Bullet Diameter: 0.264 in
- Bullet Profile Fit: 143 gr ELD-X / 147 gr ELD Match
- Type: Bullet Seating Stem
- Die Compatibility: Hornady Custom Grade / New Dimension seating dies
- Quantity: 1
- Country of Origin: Made in the USA
What’s Included
- One Hornady ELD seating stem (6.5mm .264, fits 143 gr ELD-X / 147 gr ELD Match)
Frequently Asked Questions
What bullets does the Hornady ELD seating stem for 6.5mm fit?
This stem is profiled for the 6.5mm .264 caliber ELD family, specifically the 143 grain ELD-X and the 147 grain ELD Match. Its shape is cut to match the long ogive of those bullets so they seat cleanly without tip damage. If you're loading other 6.5mm bullet weights or profiles, Hornady makes additional stems cut for those shapes.
Will this seating stem work in dies from other brands?
No. The Hornady ELD seating stem is designed to thread into Hornady Custom Grade dies, also known as New Dimension seating dies. It is not made to fit seating dies from other manufacturers.
Do I really need a dedicated ELD seating stem?
The standard stem that comes in most dies is cut for a more general bullet nose, which can leave a ring or press into the soft polymer tip of an ELD bullet. A matched stem contacts the bullet lower on the ogive for straighter seating and more consistent depth. Reloaders chasing match accuracy with ELD bullets tend to find it a worthwhile upgrade.
Is the Hornady ELD seating stem hard to install?
Not at all. You back out your seating adjustment, unscrew the existing stem, thread in this one, and then re-set your seating depth. The whole swap takes just a minute or two with basic hand pressure.




Reviews
There are no reviews yet.