Description
If you're loading .30 caliber match bullets and your standard seating stem is leaving rings or marks on the ogive, this is the fix. The Hornady ELD Match Seating Stem (#397108) is machined to the specific profile of Hornady's .308 match projectiles, so it makes contact in the right spot instead of jamming against the tip. That means straighter, more consistent seating and bullets that come out of the die looking exactly like they went in.
This stem is built for the 155, 168, and 178 grain ELD Match lineup, and it also handles the older A-MAX bullets in those same weights. It drops right into a Hornady Custom Grade New Dimension seating die. Pop the standard stem out, thread this one in, set your depth, and you're loading. It's about as simple a swap as reloading gets, and it makes a real difference when you're chasing tight groups.
Why the ELD Match Seating Stem Profile Matters
The secret ballistic tip and sleek ogive on ELD Match bullets is part of what makes them fly so well, and a generic stem can mar that nose or seat it crooked. This stem's internal cavity is cut to mirror the bullet's curve, spreading contact across the ogive rather than a single point. Less deformation up front usually translates to better concentricity and tighter velocity spreads down range, which is the whole point of running match components.
Fit Notes for the .308 Seating Stem
This is a component part, not a complete die. It only works inside Hornady Custom Grade dies and is not compatible with dies from other makers. It's a smart companion to the Hornady micro-adjust seating setup if you want repeatable, dialed-in seating depth. For anyone running precision .308, .30-06, or the magnum thirties with these match bullets, it's an inexpensive upgrade that earns its keep at the bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397108
- UPC: 090255971088
- Caliber: 30 Cal (.308)
- Bullet Diameter: 0.308 in
- Bullet Weights: 155 / 168 / 178 gr
- Bullet Compatibility: ELD Match and A-MAX
- Die Compatibility: Hornady Custom Grade New Dimension Seating Dies
- Quantity: 1 seating stem
- Country of Origin: United States
What’s Included
- One Hornady ELD Match / A-MAX seating stem (.30 cal .308, 155/168/178 gr)
Frequently Asked Questions
Which bullets does the Hornady ELD Match Seating Stem .308 work with?
It's profile-matched for Hornady's .30 caliber ELD Match bullets in 155, 168, and 178 grain weights. It also works with the older A-MAX bullets in those same weights, since they share a similar ogive. For heavier .308 match bullets like 208 or 225 grain, you'd want a different stem designed for those profiles.
Will this seating stem fit my existing seating die?
It's designed to drop into Hornady Custom Grade New Dimension seating dies. You simply remove the standard seating stem and thread this one in its place. It is not compatible with seating dies from other manufacturers.
Do I really need a bullet-specific seating stem?
For match shooting, it helps. A standard stem can contact the bullet tip or a single point on the ogive and cause marring or crooked seating, which hurts concentricity. This stem spreads contact along the correct part of the ogive for cleaner, more consistent rounds.
Is this a complete die or just the seating stem?
It's just the seating stem, sold as a single component. You'll need a Hornady Custom Grade seating die to use it. Think of it as a targeted upgrade for the die you already own.



Reviews
There are no reviews yet.