Description
If you load long, high-BC 6.5mm bullets and you're seeing a faint ring or a flattened tip after seating, the stem inside your die is usually the culprit. A standard stem can bottom out on the tip or grab too high on the ogive, which messes with concentricity and your carefully measured loads. This Hornady ELD Match stem is cut to the exact profile of their 6.5mm match bullets, so it cradles the bullet at the right spot and lets you seat consistently without beating up the nose.
Why This 6.5mm Seating Stem Matters
The shape of a seating stem decides where pressure lands on the bullet. Contact too high on the ogive and you get a visible ring. Contact on the meplat and you deform the tip, which is the last thing you want on a bullet you picked for its ballistic coefficient. This stem is machined to match the 6.5mm 130 and 140 grain profile, so the bullet nests in cleanly and you get straighter, more repeatable seating depth round after round.
What This Hornady Stem Fits
This is a drop-in replacement for the seating stem in Hornady Custom Grade and New Dimension seating dies. It's designed to work with Hornady's A-MAX, A-Tip, ELD Match, ELD-X, FTX, and MonoFlex bullets in the 6.5mm / .264 class around 130 to 140 grains. Keep in mind it's built for Hornady dies only and won't thread into other brands. Swapping it is about as easy as reloading maintenance gets. Back out the old stem, thread this one in, set your depth, and you're loading again.
Simple Upgrade, Real Payoff
For anyone chasing tight groups with the 6.5 Creedmoor, 6.5 PRC, 6.5×55, or similar, a correct seating stem is a cheap fix that punches well above its size. It's a small steel part that protects the tips of pricey match bullets and keeps your runout where you want it. If you already run Hornady dies and load match-grade 6.5mm projectiles, this is the piece that makes them seat the way they're supposed to.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397106
- UPC: 090255971064
- Caliber: 6.5mm / .264
- Bullet Weight Range: 130 / 140 Grain
- Bullet Compatibility: A-MAX, A-Tip, ELD Match, ELD-X, FTX, MonoFlex
- Die Compatibility: Hornady Custom Grade / New Dimension Seating Dies
- Component Type: Bullet Seating Stem
- Material: Steel
- Quantity: 1
What’s Included
- One Hornady ELD Match 6.5mm 130/140 gr seating stem (397106)
Frequently Asked Questions
Will this seating stem fit my dies?
It's made to fit Hornady Custom Grade and New Dimension seating dies. It won't thread into dies from other brands like RCBS, Redding, or Lee. If you're running Hornady dies for 6.5mm, it's a direct drop-in replacement for the stem that came with your die.
Which bullets does the 6.5mm ELD Match seating stem work with?
It's machined for Hornady's 6.5mm / .264 match-style bullets in the 130 to 140 grain range, including the ELD Match, A-MAX, A-Tip, ELD-X, FTX, and MonoFlex. The stem is cut to cradle the ogive of these longer, tipped projectiles so they seat straight. If you load heavier or lighter 6.5mm bullets with a very different profile, check that your bullet falls in this weight window.
Why would I need to swap to this stem instead of the one in my die?
Standard stems often contact long high-BC bullets too high on the ogive or right on the tip, which can leave a ring on the jacket or flatten the meplat. That hurts concentricity and the ballistic coefficient you paid for. This stem is profiled to the match bullet so pressure lands in the right place, giving you cleaner, more consistent seating.
Is the seating stem easy to install?
Yes. You just back the old stem out of your seating die, thread this one in, and reset your seating depth. No special tools needed, and the whole swap takes a minute or two.





Reviews
There are no reviews yet.