Description
If you're loading .257 bullets with a long, polymer-tipped nose like the ELD Match, the standard seating stem that came with your die set doesn't always make clean contact. That's where this one comes in. The Hornady 397101 seating stem is machined to the specific profile of the 25 Cal (.257") 134 grain ELD Match bullet, so it cradles the ogive instead of pressing on the tip. The result is bullets that seat straight, with less runout and no marred meplats or scuffed boat tails.
Why the 397101 ELD Match Stem Earns Its Place
The tip on an ELD Match bullet does a lot of work downrange, and a generic stem can dent or deform it during seating. This profiled stem spreads contact across the curve of the bullet where it belongs. For anyone chasing tight groups out of a 25 Creedmoor, 257 Weatherby, or 25-06, that small change shows up on paper. It's a simple, inexpensive upgrade that removes a variable a lot of handloaders overlook.
Fitting the Hornady .25 Cal Seating Stem to Your Dies
This stem is built for Hornady Custom Grade dies and threads into the seating die in place of your existing stem. It is not compatible with dies from other makers, so keep that in mind if you're running a mixed bench. Swapping it is a couple-minute job: back out your old stem, thread this one in, and reset your seating depth.
One Stem, Several .257 Bullets
Worth knowing before you buy: the 397101 covers more than just the 134gr ELD Match. Hornady lists this same stem as the correct fit for several .257 projectiles, including the 95gr ELD-VT, 112gr CX, and the 128gr and 135gr ELD-X. So if you shoot more than one of those bullets, this single stem has you covered. Made in the USA and backed by Hornady's lifetime guarantee, it's the kind of small part that quietly makes your loads better.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 397101
- UPC: 090255971019
- Caliber: 25 Cal (.257")
- Bullet Weight: 134 Grain
- Bullet Type: ELD Match
- Component Type: Bullet Seating Stem
- Die Compatibility: Hornady Custom Grade Dies
- Quantity: 1 Stem
- Country of Origin: United States
What’s Included
- 1 Hornady ELD Match seating stem (25 Cal .257, 134gr profile, PN 397101)
Frequently Asked Questions
What dies does the Hornady 397101 seating stem fit?
It's designed specifically for Hornady Custom Grade seating dies. It threads into the die in place of the standard stem that came with your set. It is not compatible with dies from other manufacturers.
Will this ELD Match seating stem work with other .257 bullets besides the 134gr?
Yes. Hornady lists the 397101 as the correct stem for several .257 projectiles, including the 95gr ELD-VT, 112gr CX, and the 128gr and 135gr ELD-X, in addition to the 134gr ELD Match. If you load more than one of those bullets, this one stem covers them.
Why do I need a dedicated stem for ELD Match bullets?
ELD Match bullets have a long, pointed polymer tip and a specific ogive shape. A generic stem can contact the tip and dent or deform it during seating, which hurts consistency. This stem is profiled to match the bullet's curve so it seats cleanly without damage.
Is this seating stem hard to install?
Not at all. You back your current stem out of the seating die, thread this one in, and reset your seating depth. It takes just a couple of minutes at the bench.



Reviews
There are no reviews yet.