Description
If you run a Hornady bullet feeder die on your progressive press but don't want to mess with a full hopper setup, these Lock-N-Load Bullet Tubes are the shortcut you've been looking for. You preload each tube with .45 ACP bullets, drop it onto the top of your feeder die, and let gravity do the work while you focus on the handle. It's a simple idea that pays off big when you're trying to crank out volume.
This set comes with three tubes, all machined from aluminum so they hold up to regular use on the bench. Each tube swallows 40 or more bullets depending on the exact projectile weight and profile you're loading, which means fewer stops to refill mid-session. A lot of reloaders like to keep all three loaded and ready so they can swap an empty tube for a full one and barely break stride.
Keeping an Eye on Your Lock-N-Load Bullet Tubes
Each tube has a milled window running down the side so you can glance over and see exactly how many bullets you have left. No shaking the tube or guessing. When you see the stack getting low near the window, you know it's about time to grab the next loaded tube and keep going.
Where the .45 ACP Bullet Tubes Fit In
These tubes are built to work with Hornady bullet feeder dies and will mount on any compatible progressive press using standard 7/8-14 thread die stations. The .452 diameter bore handles .45 ACP projectiles, and since .44 caliber bullets run smaller at roughly .429 to .430, they'll drop through these tubes as well. The bullet feeder die itself is sold separately, so make sure you've got that piece of the system before these go to work for you. For anyone loading a steady diet of .45, this is one of the easiest ways to add speed without a big footprint on the bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 095352
- UPC: 090255953527
- Caliber: .45 ACP (fits 44/45)
- Capacity: 40+ bullets per tube
- Quantity: 3-Pack
- Material: Aluminum
- Product Type: Bullet Feeder Tube
- Thread Compatibility: 7/8-14 die stations
- Compatible With: Hornady bullet feeder dies
- Length: 23.1 in
- Country of Origin: United States
What’s Included
- 3 Hornady Lock-N-Load .45 ACP bullet feeder tubes
Frequently Asked Questions
Do the Lock-N-Load Bullet Tubes work on their own?
No, these tubes are designed to feed bullets into an existing Hornady bullet feeder die, which is sold separately. The tube drops onto the top of the die, and bullets feed down as you work the press. You'll need that die in place for the system to function.
How many bullets does each .45 ACP tube hold?
Each tube holds roughly 40 or more bullets, though the exact count depends on the weight and profile of the projectiles you're loading. Shorter, lighter bullets will stack a few more, while longer ones take up more room. The milled window lets you keep tabs on how many are left.
Will these tubes work for .44 caliber bullets too?
Yes. The tube bore is sized for the .452 diameter of .45 ACP, and .44 Mag and .44 Special bullets run smaller at around .429 to .430, so they'll pass through just fine. That's why this item is often listed as a 44/45 tube.
What presses are the Hornady bullet tubes compatible with?
They'll fit any compatible progressive press that uses standard 7/8-14 thread die stations, paired with a Hornady bullet feeder die. This covers a wide range of progressive setups. As long as you're running the Hornady feeder die, these tubes slot right in.





Reviews
There are no reviews yet.