Description
If you run a progressive press and load a lot of 40 S&W or 10mm, the Hornady Lock-N-Load Bullet Tubes are built to keep your rhythm going. Instead of stopping to set a bullet by hand on every stroke, you pre-load these aluminum tubes, drop them into the top of your Hornady bullet feeder die, pull the pin, and let gravity do the work. Each tube holds roughly 28 to 34 bullets depending on the length of the projectile you're loading, and this set gives you three tubes so you can keep a couple loaded and ready while one is running on the press.
How the Lock-N-Load Bullet Tube System Works
The tubes are designed to work with Hornady's pistol bullet feeder dies, which are case activated. That means a bullet only drops when a case rises into the station, so you get one bullet per round without jamming up the works. The feeder die for this caliber is sold separately under item number 095332, so make sure you've got that paired up before you order. A milled window runs down the side of each tube so you can glance over and see roughly how many bullets are left before you need to swap in a fresh one.
Why Reloaders Keep Extra Bullet Tubes Around
Having three tubes is the whole point. One rides in the die while the other two sit loaded on the bench, so you're never fully stopping your session to refill. A quick swap and a pull of the cotter pin gets you right back to cranking rounds. These fit any progressive press using 7/8-14 threaded die stations when paired with the matching Hornady feeder die.
A couple of real-world notes worth passing along: these are built for jacketed and plated bullets, not cast lead, and they're caliber specific, so the 40/10mm tubes won't swap over for your 9mm or 45 setups. Match the right tube to the right die and they'll move a serious volume of ammo for years.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 095351
- UPC: 090255953510
- Caliber: 40 S&W / 10mm
- Product Type: Bullet Feeder Tube
- Material: Aluminum
- Capacity: Approximately 28 to 34 bullets per tube (varies by bullet length)
- Quantity: 3 Pack
- Die Compatibility: Hornady pistol bullet feeder die (item 095332, sold separately)
- Press Compatibility: Progressive presses with 7/8-14 threaded die stations
- Feature: Milled viewing window shows bullet level
- Bullet Compatibility: Jacketed and plated bullets (not for cast lead)
- Length: 21.9 in
- Country of Origin: United States
What’s Included
- 3 Hornady Lock-N-Load Bullet Tubes for 40 S&W/10mm
- Cotter pin for each tube
- Instruction sheet
Frequently Asked Questions
Do the Hornady Lock-N-Load Bullet Tubes come with the bullet feeder die?
No, the bullet feeder die is sold separately under Hornady item number 095332. These tubes are designed to feed into that die, so you'll need it to use the system. The tubes handle the bullet storage and feeding, while the case-activated die does the actual placement on the press.
How many bullets does each tube hold?
Each tube holds approximately 28 to 34 bullets, and the exact count depends on the length of the projectile you're loading. Shorter bullets stack more per tube, longer ones a bit less. With three tubes in the pack, you can keep a couple pre-loaded while one runs on the press.
Can I use these bullet tubes with cast lead bullets?
No, Hornady designed these tubes for jacketed and plated bullets. Cast lead is not recommended because it can hang up in the system. Stick with jacketed or plated projectiles for smooth, reliable feeding.
Will the 40 S&W/10mm tubes work for other calibers?
No, these tubes are caliber specific to 40 S&W and 10mm and should be paired with the matching caliber feeder die. For other calibers like 9mm or 45 Auto, Hornady offers separate tubes sized for those bullets. Always match the right tube to the right die for the caliber you're loading.



Reviews
There are no reviews yet.