Description
Running a bunch of .45 ACP through a progressive press is a whole lot nicer when you aren't placing every bullet by hand. That's exactly what the Hornady Bullet Feeder Die handles for you. It uses a case-activated design, meaning a bullet only drops when a case is actually sitting underneath it. That little bit of engineering cuts down on the fumbling and misfeeds that slow a session to a crawl, and it keeps your rhythm steady once you get the press humming.
How the Hornady .45 ACP Bullet Feeder Die Works
Inside the die is a two-collet system machined from solid steel, built to drop one bullet at a time onto the expanded case mouth. Solid steel means it holds up to long reloading sessions without wearing out, so it should ride along with your press for years. The die pairs with Hornady's pistol bullet feeder hopper or the Lock-N-Load bullet tubes, and it also includes a powder through expander, so it earns its spot in the tool head.
Fitting the Bullet Feeder Die to Your Press
This die was designed around the Lock-N-Load AP, but it isn't locked to it. It uses the industry-standard 7/8"-14 die threads, so it drops into any press with an open station and that common thread pitch. One thing worth knowing before you set it up: this feeder is made for jacketed bullets and does not run lead or plated projectiles, so plan your component choices accordingly.
What .45 ACP Reloaders Get Out of It
If you load .45 in any real volume, the time savings add up fast. You keep both hands on the press and the bullets keep coming, which means more finished rounds per hour and a lot less hand fatigue. Caliber swaps stay quick too, and loaders who run multiple pistol calibers often keep a dedicated feeder die for each one so changeovers take seconds instead of minutes.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 095334
- UPC: 090255953343
- Caliber: .45 ACP (.451/.452 bullets)
- Product Type: Bullet Feeder Die
- Collet Material: Solid steel
- Feeding: Case-activated
- Die Threads: 7/8"-14
- Length: 7.15 in
- Shipping Weight: 0.76 lbs
What’s Included
- Hornady .45 ACP bullet feeder die
- Powder through expander
Frequently Asked Questions
What press does the Hornady .45 ACP bullet feeder die work with?
It was designed for the Hornady Lock-N-Load AP progressive, but it isn't limited to it. The die uses standard 7/8"-14 threads, so it fits any press with that thread pitch and an open station. You'll get the most out of it on a progressive paired with the Hornady pistol bullet feeder hopper or Lock-N-Load bullet tubes.
Can I run lead or plated bullets through this feeder die?
No, this feeder is built for jacketed bullets only. Lead and plated projectiles aren't compatible with Hornady's pistol bullet feeder system. Stick with jacketed .45 caliber bullets in the .451 and .452 range and it'll feed smoothly.
How does the case-activated design actually help?
A bullet only drops when a case is present under the die, so you don't end up with stray bullets falling when a station is empty. That keeps feeding consistent and cuts down on jams during a long run. It's the feature that makes volume loading feel effortless compared to placing each bullet by hand.
Do I need the bullet feeder hopper, or can I use this die on its own?
The die reaches its full potential with the bullet feeder hopper or Lock-N-Load bullet tubes, which keep a steady supply of bullets staged. That said, it can be used in a more limited way to feed one bullet at a time if you want to free up a hand. Most loaders pair it with the tubes as an affordable middle ground.



Reviews
There are no reviews yet.