Description
If you run a progressive press and load a lot of .44 Special or .44 Magnum, the manual step of placing each bullet by hand is the thing that slows you down. This Hornady Lock-N-Load Bullet Feeder Die is the piece that fixes that. It works hand in hand with the Hornady Lock-N-Load Bullet Feeder to set a bullet on the case mouth automatically, so you can keep both hands on the press handle and the brass moving.
The whole system is case activated, which is the smart part. A bullet only drops when a case is present under the die, so you are not spilling projectiles or chasing a bullet that fed with no brass under it. That cuts down on fumbles and keeps your rhythm steady through a long loading session.
What the .44 Spl/.44 Mag Feeder Die Brings to the Bench
The collets inside are machined from solid steel for each caliber, so they hold up to years of cycling without wearing out or going sloppy. The die uses standard 7/8-14 threads, which means it screws right into a standard die station on just about any progressive press, not only Hornady's own. Pair it with the Lock-N-Load Bullet Feeder and the bullet feeding happens on its own while you focus on the stroke.
Getting the Most From This Bullet Feeder Die
This is a .44 Special and .44 Remington Magnum specific die, so the collets are sized for those projectiles. It ships with die locking rings and a storage box to keep it organized on the bench. Keep in mind this die does its job as part of the larger Lock-N-Load Bullet Feeder setup, so you will want that feeder unit to take full advantage of the automatic feeding. For anyone pushing real volume in .44, it is one of those upgrades that pays you back in time every time you sit down to load.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 095333
- Model Number: 95333
- UPC: 090255953336
- Caliber: .44 Special / .44 Remington Magnum
- Die Type: Bullet Feeding
- Number of Dies: 1
- Thread: 7/8-14
- Collet Material: Solid steel
- Activation: Case activated
- Shellholder Included: No
- Storage Box Included: Yes
- Country of Origin: United States
What’s Included
- Hornady Lock-N-Load Bullet Feeder Die (.44 Spl/.44 Mag)
- Die locking rings
- Storage box
Frequently Asked Questions
Do I need the Hornady Lock-N-Load Bullet Feeder to use this die?
Yes. This die is designed to work together with the Hornady Lock-N-Load Bullet Feeder, which is what actually holds and meters the bullets. The die is the part that sets each bullet onto the case mouth, so you will want the feeder unit to get the full automatic feeding benefit.
Will this bullet feeder die fit presses other than Hornady?
It uses standard 7/8-14 die threads, so it will thread into a standard die station on nearly any progressive press, not just Hornady's own. The Lock-N-Load Bullet Feeder it pairs with is also built to work with presses running those standard threads.
What does case activated mean on this die?
Case activated means a bullet will only feed when a case is actually present under the die. This keeps the feeder from dropping a projectile into an empty station, which cuts down on spilled bullets and keeps your loading rhythm clean.
Does this die work for both .44 Special and .44 Magnum?
It does. The collets are sized specifically for .44 Special and .44 Remington Magnum, so it handles both of those calibers from the same die. If you load a different caliber, Hornady offers separate feeder dies sized for those projectiles.




Reviews
There are no reviews yet.