Description
If you run a Hornady Lock-N-Load Automatic Case Feeder, the feed plate is the piece that does the heavy lifting. The Large Pistol Case Feeder Plate is the correct plate for the bigger handgun brass, and it's the part that actually sorts, orients, and drops your cases down the feed tube so they arrive at the shell plate ready to go. Without the right plate for your case size, the feeder just spins and sulks, so matching the plate to your brass matters.
What the Large Pistol Plate Feeds
This plate covers a wide spread of large pistol cartridges, not just the 357 and 44 Mag in the name. It handles the common stuff like 357 Magnum, 38 Special, 44 Special, 44 Magnum, 45 ACP, and 45 Colt, along with a longer list that includes 10mm Auto, 41 Remington Magnum, 357 Rem Max, 38 Short and Long Colt, 38 S&W, 454 Casull, 480 Ruger, and old cowboy favorites like 38-40 and 44-40 Winchester. If you load a mix of revolver and big-bore auto brass, this is likely the plate you reach for most.
Swapping the Plate on Your Feeder
Changeovers are quick once you've done one. You pull the existing plate straight up off the motor shaft, then set the new plate down over the shaft and give it a rotate until the pawls on the shaft catch the two slots on the bottom of the plate. That's it. No tools, no fuss, and you're back to feeding brass in under a minute. Depending on the exact case diameter you're running, some setups call for a washer under the plate to fine-tune how the cases drop, so it's worth checking your feeder manual for your specific cartridge.
Built for the Lock-N-Load System
Hornady designed these plates specifically for the Lock-N-Load Automatic Case Feeder, and the fit and function reflect that. The feeder sells the plates separately on purpose, so you only buy the sizes you load for instead of paying for plates you'll never use. Pick up the small pistol, large rifle, or small rifle versions down the road and you've got your whole bench covered. Made in the USA, this is a straightforward part that does exactly one job and does it well.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 095312
- UPC: 090255953121
- Plate Size: Large Pistol
- Caliber/Gauge: 357/44 Mag
- Fits: Hornady Lock-N-Load Automatic Case Feeder
- Color: Black
- Country of Origin: USA
- Shipping Weight: 1.5 lbs
What’s Included
- Hornady Large Pistol Case Feeder Plate (1)
Frequently Asked Questions
What does the Large Pistol Case Feeder Plate fit?
This plate is made for the Hornady Lock-N-Load Automatic Case Feeder. It's the large pistol size, so it handles the bigger handgun brass like 357 Magnum, 44 Magnum, 45 ACP, and 45 Colt. The plate is sold separately from the feeder so you can match it to the cartridges you load.
Which cartridges will the large pistol plate feed besides 357 and 44 Mag?
Quite a few. Along with 357 Magnum and 44 Special/Magnum, it covers 38 Special, 45 ACP, 45 Colt, 10mm Auto, 41 Rem Magnum, 357 Rem Max, 38 S&W, 454 Casull, 480 Ruger, and even cowboy rounds like 38-40 and 44-40 Winchester. Check the feeder manual for the full compatibility chart if you load something unusual.
How do I swap the feed plate on my case feeder?
It's a tool-free job. Pull the old plate straight up off the motor shaft, then set the new plate over the shaft and rotate it until the pawls engage the two slots on the bottom of the plate. The whole swap takes under a minute once you've done it a time or two.
Do I need a washer when running 357 Mag or 38 Special on this plate?
Depending on your exact case, some large pistol setups use a washer under the plate to fine-tune how cases drop through. It's a common question with the shorter revolver brass. Your Lock-N-Load Case Feeder manual lays out the correct washer and setup for each cartridge, so it's worth a quick look before your first run.




Reviews
There are no reviews yet.