Description
If you're loading 5.45x39mm on a Hornady progressive, the #56 is the shell plate you want. This is a 5-slot plate machined specifically for the 5.45×39 case head, which runs an unusual rim diameter right around 10mm that most standard shell plates won't grab correctly. Drop this one in and your cases index where they should, every stroke.
What the Hornady #56 Shell Plate Does on Your Press
The plate carries five stations around the LnL AP, so each pull of the handle advances a case through sizing, priming, powder, and seating all at once. A radius on each shell holder mouth lets cases slide in clean without hanging up, and the retainer spring is built to stay put while you're feeding brass. Those two details matter more than they sound once you've got a real rhythm going and you're not stopping to re-seat a spring or fight a case that won't drop in.
Fitment for the Lock-N-Load AP and Pro-Jector
This plate works with the Lock-N-Load AP in both EZ-Ject and older wire ejector forms, as well as the older Pro-Jector press. Swapping it is a quick job, which is the whole point of the Lock-N-Load shell plate system. If you bounce between calibers, keeping dedicated plates like the #56 on hand means a caliber change is a couple minutes instead of a chore.
Worth knowing: the #56 is built around case head dimensions, not a single cartridge name, so anything sharing the 5.45×39 head size will run on it too. Hornady builds these to hold up for the life of the press, and this one earns its keep for anyone feeding a 5.45 AR or an AK-pattern rifle without buying factory ammo. If you reload the Russian 5.45, this is the plate that belongs on your bench.
Key Specifications
- Model: #56
- Cartridge: 5.45x39mm
- Stations: 5-slot plate
- Compatible Presses: Lock-N-Load AP (EZ-Ject and wire ejector) and Pro-Jector
- Finish: Silver
- Manufacturer: Hornady
- Manufacturer Part Number: 392656
- UPC: 090255926569
- Shipping Weight: 0.555 lb
- Country of Origin: United States
What’s Included
- One Hornady #56 shell plate (392656)
Frequently Asked Questions
What cartridge is the Hornady #56 shell plate for?
The #56 is set up for 5.45x39mm. It's cut for that cartridge's case head, which runs an unusual rim size around 10mm. Any cartridge sharing the same case head dimensions will also run on this plate.
Will the #56 shell plate fit my Lock-N-Load AP press?
Yes. It fits the Lock-N-Load AP in both EZ-Ject and older wire ejector versions, along with the older Pro-Jector press. It installs quickly as part of the Lock-N-Load shell plate caliber-change system.
Is a shell plate the same thing as a shell holder?
No, they're different parts. A shell plate is the five-station rotating plate for progressive presses like the Lock-N-Load AP, while a shell holder is the smaller single-cartridge piece used in single-stage presses. Hornady lists a #56 in both forms for 5.45×39, so make sure you're grabbing the plate if you're on a progressive.
Do I need the retainer spring with the #56 shell plate?
The retainer spring works alongside the plate to keep cases seated as they index around the stations. Hornady designed the spring to stay in place while you insert brass, which keeps your loading rhythm from getting interrupted. The radius on each shell holder mouth also helps cases drop in smoothly.




Reviews
There are no reviews yet.