0
0

Hornady Lock-N-Load Shellplate #19 for 6.5×55 Swedish Mauser

UPC: 090255926194

$57.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Running a progressive press is all about rhythm, and the right shellplate is what keeps that rhythm going. The Hornady Lock-N-Load Shellplate #19 is the caliber-specific plate you need to load 6.5x55mm Swedish Mauser on your Lock-N-Load AP, and because it's keyed to case head diameter rather than one single round, it covers a good chunk of the popular .264 and .473 case head family too. Think cartridges like 6.5 Creedmoor, .260 Remington, .308 Winchester, .270 Winchester, and .30-06 Springfield, all of which share the same base dimensions and ride in the same plate.

What the #19 Lock-N-Load Shellplate Brings to the Bench

This plate is machined from steel for the kind of durability that holds up to thousands of cycles. Each case station has a subtle radius cut into the mouth, which is a small detail that makes a real difference when you're indexing cases at speed. Cases slide in and drop out clean without hanging up, and the built-in retainer spring is designed to hold your brass in place while you're seating and crimping so you're not fighting tipped cases mid-session.

Fitting the Hornady #19 Shellplate to Your Press

Swapping shellplates on the Lock-N-Load AP is quick, which is half the appeal of running a dedicated plate for each case head group instead of constantly readjusting. The #19 is built for the Lock-N-Load AP, including both the EZ-Ject and older wire-eject versions, and it also fits the older Pro-Jector press. If your press still has the original spring-type case retainer system, you'll want to grab Hornady's Auto Press retrofit kit to run current-production plates.

To confirm your exact cartridge falls under the #19, check it against the Hornady shellplate chart by case head diameter. Made in the USA.

Key Specifications

  • Shellplate Number: #19
  • Primary Caliber: 6.5x55mm Swedish Mauser
  • Case Head Diameter: .264 / .473 family (shares with 6.5 Creedmoor, .260 Rem, .308 Win, .270 Win, .30-06)
  • Material: Machined Steel
  • Finish/Color: Silver
  • Compatibility: Lock-N-Load AP (EZ-Ject and wire-eject) and Pro-Jector presses
  • Manufacturer: Hornady
  • Manufacturer Part Number (MPN): 392619
  • UPC: 090255926194
  • Style: Press Type
  • Pack Quantity: 1
  • Country of Origin: Made in the USA

What’s Included

  • Hornady Lock-N-Load Shellplate #19 (quantity 1)

Frequently Asked Questions

What caliber is the Hornady #19 shellplate for?

The #19 is designed for 6.5x55mm Swedish Mauser. Because Hornady keys shellplates to case head diameter instead of a single cartridge, it also handles other rounds that share the same base, including 6.5 Creedmoor, .260 Remington, .308 Winchester, .270 Winchester, and .30-06 Springfield. Always confirm your specific cartridge against the Hornady shellplate chart before loading.

Will the #19 shellplate fit my Lock-N-Load AP press?

Yes. The #19 is built for the Hornady Lock-N-Load AP, covering both the current EZ-Ject models and the older wire-eject versions, and it also fits the older Pro-Jector press. If your press still uses the original spring-type case retainer system, you'll need Hornady's Auto Press retrofit kit to run current-production plates.

What is the Hornady #19 shellplate made of?

It's machined from steel for long-term durability through high-volume loading. Each station features a radiused mouth so cases feed and release cleanly, and the retainer spring is designed to keep your brass seated while you work.

Is a shellplate the same thing as a shellholder?

No, they're different tools. A single-stage shellholder grips one case, while a shellplate is a rotating multi-station plate that indexes several cases at once on a progressive press. The #19 shellplate (part 392619) is for the Lock-N-Load AP and Pro-Jector; the matching single-stage #19 shellholder is a separate part.

Additional information

UPC

090255926194

Manufacturer

Manufacturer Part Number

392619

Shipping Weight

1.5

Style

Press Type

Reviews

There are no reviews yet.

Be the first to review “Hornady Lock-N-Load Shellplate #19 for 6.5×55 Swedish Mauser”