Description
If you run a Hornady Lock-N-Load AP or Pro-Jector progressive press, the #16 shell plate is the part that holds your cases in position through every station. This one is made from steel with a silver finish and a 5-station layout, matching the number you'll find on Hornady's shell holder chart so it's easy to cross-reference before you order.
What makes the #16 worth having on the bench is how many cartridges it covers. A single plate handles a long list of small-case rounds, including .380 Auto, .17 Remington, .17-222, .17-223, .204 Ruger, .221 Remington Fireball, .222 Remington, .222 Remington Magnum, .223 Remington, 5.6x50mm Magnum, 6x45mm (6mm-223), 6mm TCU, 6x47mm Remington, 6.5mm TCU, 7mm TCU, 7mm-223 Ingram, and 7x47mm Helm. Anything sharing those same case head dimensions will drop right in, which is a nice bonus if you're loading wildcats or less common varmint rounds off the same parent cases.
How the #16 Shell Plate Earns Its Keep
The mouth of each shell holder pocket has a subtle radius machined into it, so cases feed in and slide out without hanging up. The retainer spring is built to stay put when you're seating a case, which keeps the whole cycle smooth and predictable. Little details like that add up over a long loading session when you're running hundreds of rounds.
Fitment for Your Lock-N-Load Press
This plate fits the full range of Hornady Lock-N-Load AP presses, covering both the newer EZ-Ject models and the older wire ejector versions, along with the Pro-Jector. Changing plates is a fast operation, which is really the whole point of the Lock-N-Load system: get your caliber swapped and get back to pulling the handle. If you load multiple cartridges in the #16 family, keeping a dedicated plate ready saves you from breaking down a setup you already have dialed in.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 392616
- UPC: 090255926163
- Product Type: Shell Plate
- Plate Size: #16
- Caliber/Gauge: Multi-Caliber
- Capacity: 5 Stations
- Material: Steel
- Finish: Silver
- Compatible Presses: Lock-N-Load AP (EZ-Ject and wire ejector) and Pro-Jector
- Matching Shell Holder: #16
- Quantity: 1
- Shipping Weight: 0.56 lbs
What’s Included
- 1 Hornady Lock-N-Load #16 shell plate
Frequently Asked Questions
Which presses does the Hornady #16 shell plate fit?
It fits Hornady Lock-N-Load AP presses, including both the EZ-Ject and older wire ejector versions, as well as the Pro-Jector press. It's a direct quick-change plate for those systems, so swapping it in is a fast job on the bench.
What calibers will the #16 shell plate load?
The #16 covers a family of small-case cartridges including .380 Auto, .17 Remington, .204 Ruger, .221 Remington Fireball, .222 Remington, .223 Remington, 5.6x50mm Magnum, 6mm TCU, 6.5mm TCU, 7mm TCU, and 7x47mm Helm, among others. Any cartridge that shares the same case head dimensions as these will also work. It's always smart to check the Hornady shell plate chart against your exact round before loading.
Does the shell plate number match the shell holder number?
Yes. Hornady's shell plate numbers correspond to their shell holder numbers, so the #16 plate lines up with the #16 shell holder reference. That makes it easy to confirm the right plate for your cartridge using the standard chart.
How many stations does the #16 shell plate have?
This plate has a 5-station layout, which matches the progressive design of the Lock-N-Load AP. Each pocket has a radiused mouth so cases feed and release cleanly as the plate indexes through the loading cycle.




Reviews
There are no reviews yet.