Description
The Hornady #14 Lock-N-Load AP Shell Plate is the piece that holds your cases in place as they ride through each station of your progressive press. This one is cut for the bigger case heads, covering cartridges like 45-70 Government along with the heavy-hitting Weatherby magnums. If you're running one of those on your Lock-N-Load, the #14 is the plate you need indexed under your dies.
Hornady builds these from steel and machines a subtle radius into each shell holder mouth, which is a small detail that makes a real difference when cases are feeding in and out at speed. The cases drop in clean, sit with very little wiggle, and cycle smoothly without hanging up. There's also a retainer spring designed to stay seated while you insert brass, so you're not chasing parts across the bench mid-session.
What the #14 Shell Plate Actually Fits
The #14 covers 45-70 Government, 33 Winchester, 338-378 Weatherby Magnum, 416 Weatherby Magnum, and 30-378 Weatherby Magnum. Like all of Hornady's numbered plates, a single plate handles any cartridge that shares the same case head dimension, so you may find it does double duty across more of your brass than you'd expect. When in doubt, check Hornady's shell plate chart against your specific cartridge before ordering.
Changing Calibers on Your Lock-N-Load AP
The whole point of a shell plate system is quick caliber swaps, and that's where this one earns its keep. Keeping a few numbered plates on hand means you can jump from one cartridge family to another without tearing your press apart. This #14 is built for both the EZ-Ject and wire ejector versions of the Lock-N-Load AP, and it also works with the older Pro-Jector press, so it fits a wide range of Hornady setups. If your press still runs the old spring-type case ejector, note that the current-style plates are designed around the newer ejection systems.
Key Specifications
- Manufacturer: Hornady
- Shell Plate Number: #14
- Manufacturer Part Number: 392614
- UPC: 090255926149
- Material: Steel
- Color: Silver
- Cartridges: 45-70 Gov't, 33 Win, 30-378 Wby Mag, 338-378 Wby Mag, 416 Wby Mag
- Compatibility: Lock-N-Load AP (EZ-Ject & wire ejector) and Pro-Jector presses
- Quantity: 1
- Made In USA: Yes
- Shipping Weight: 0.55 lbs
What’s Included
- One Hornady #14 Lock-N-Load AP shell plate with retainer spring
Frequently Asked Questions
What cartridges does the Hornady #14 shell plate work with?
The #14 is sized for larger case heads, covering 45-70 Government, 33 Winchester, 30-378 Weatherby Magnum, 338-378 Weatherby Magnum, and 416 Weatherby Magnum. Because Hornady plates are indexed by case head dimension, a single plate can hold any cartridge sharing that same head size. It's always worth cross-checking Hornady's shell plate chart for your exact brass.
Does the #14 shell plate fit my Lock-N-Load AP press?
Yes, the current #14 plate is designed to fit both the EZ-Ject and wire ejector versions of the Lock-N-Load AP, and it also works with the older Pro-Jector press. If your press still uses the old spring-type case ejector system, be aware these current-style plates are built around the newer ejection designs.
Is the Hornady #14 shell plate made of steel?
It is. The plate is machined from steel and finished in silver, with a subtle radius worked into each shell holder mouth so cases feed and eject smoothly. The fit is snug, so brass sits with very little play as it cycles through the press.
What does the shell plate do on a progressive press?
The shell plate holds your cases in position and rotates them through each station as you cycle the press, so a case gets primed, charged, and seated in sequence. Matching the right numbered plate to your cartridge is what lets the Lock-N-Load AP run smoothly, and keeping a few on hand makes switching between calibers quick.




Reviews
There are no reviews yet.