Description
If you're running a Hornady Lock-N-Load AP or the older Pro-Jector, the #6 shell plate is the piece that holds your brass in place as it indexes through each station. This is the steel #6 plate, which is the right one for 6mm PPC along with several other cartridges that share the same case head.
Hornady machines a subtle radius into each shell holder mouth, and that little detail is what keeps cases dropping in and pulling out cleanly instead of hanging up on you mid-cycle. The integrated retainer spring is built to stay seated when you're loading cases onto the plate, so you're not chasing a spring across the bench every time you set up a new batch. It's a simple part, but on a progressive press the shell plate does a lot of the quiet work, and a well made one makes the whole process feel smoother.
Why the #6 Plate Covers More Than 6mm PPC
One of the handy things about the Hornady shell plate system is that a single plate handles any cartridge with a matching case head diameter. The #6 fits 6mm PPC, 22 PPC, 22 Remington Jet, 256 Winchester Magnum, 6.5 Grendel, 7.62x39mm, 38 Special, 357 Magnum, and 357 Maximum. So if you load more than one of those, this one plate pulls double or triple duty.
Fitting the Shell Plate #6 to Your Press
These current-production plates are designed to work with both the EZ-Ject and wire ejector versions of the Lock-N-Load AP, plus the Pro-Jector. Shell plate numbers are matched to case head size, not caliber name, so it's always worth double checking Hornady's shell plate chart against the brass you're loading before you order. Get the right number and swapping calibers on the press becomes a quick job rather than a project.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 392606
- UPC: 090255926064
- Shell Plate Number: #6
- Caliber: 6mm PPC
- Material: Steel
- Color: Silver
- Product Type: Shell Plate
- Compatible With: Lock-N-Load AP (EZ-Ject and wire ejector) and Pro-Jector presses
- Quantity: 1
- Made in USA: Yes
What’s Included
- One Hornady Lock-N-Load #6 shell plate with integrated retainer spring
Frequently Asked Questions
What calibers does the Hornady #6 shell plate fit?
The #6 plate is built around a shared case head size, so it covers 6mm PPC, 22 PPC, 22 Remington Jet, 256 Winchester Magnum, 6.5 Grendel, 7.62x39mm, 38 Special, 357 Magnum, and 357 Maximum. Any cartridge with that same case head dimension will seat correctly. It's always smart to confirm against Hornady's shell plate chart before loading a new round.
Will this shell plate work with my Lock-N-Load AP press?
Yes. These current-production plates are designed to fit both the EZ-Ject and wire ejector versions of the Lock-N-Load AP, as well as the older Pro-Jector press. If you're running either of those presses, the #6 is a direct fit for the calibers listed.
Does the #6 shell plate come with a retainer spring?
It does. The retainer spring is integrated and designed to stay in place while you load cases onto the plate. That keeps the brass secured as the plate indexes through each station and saves you from fumbling with a loose part during setup.
How do I know which shell plate number I need?
Shell plate numbers are matched to the case head diameter of your cartridge rather than the caliber name, which is why one plate can cover several rounds. The best move is to check your cartridge against Hornady's shell plate chart. If your brass shows up under the #6 listing, this is the plate you want.




Reviews
There are no reviews yet.