Description
If you run a Hornady Lock-N-Load AP and you're loading rimmed cartridges in the 30-30 family, the #2 shell plate is the piece that makes those sessions happen. Each plate is matched to a group of calibers that share the same rim and base dimensions, and the #2 covers a surprisingly deep list. It handles 7-30 Waters, 30-30 Winchester, 25-35 Winchester, 32 Winchester Special, 32-40 Winchester, 375 Winchester, 38-55 Winchester, 219 Zipper, 22 Savage Hi-Power, 30 Herrett, 5.6x52R, 7.5×55 Swiss, and 8.15x46R. That's a lot of classic lever-gun and single-shot brass running off a single plate.
What the #2 Shell Plate Does on Your Press
The shell plate is the rotating steel disc that holds your cases at each station as the press indexes through sizing, priming, charging, and seating. The subtle radius machined at the mouth of each shell holder pocket helps cases slide in and eject cleanly, which is what keeps a progressive run feeling smooth instead of fighting you at every pull. It's built from steel for the kind of service life you want out of a part that sees constant motion.
Fitment and Compatibility for the Lock-N-Load AP Shell Plate
This plate fits both the Lock-N-Load AP and the older Hornady Pro-Jector press, and it works with the EZ-Ject system along with all prior LNL-AP models. The numbering lines up with Hornady's shell holder chart, so the #2 plate corresponds to the #2 shell holder group. If you already know your single-stage shell holder number for a given cartridge, that same number points you to the right plate here.
Picking up extra shell plates is how most reloaders expand what their Lock-N-Load AP can do. Swapping plates is quick, so keeping a #2 on the bench means you're ready for everything from deer-season 30-30 to a batch of 7-30 Waters without hunting down a different setup.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 392602
- UPC: 090255926026
- Shell Plate Size: #2
- Material: Steel
- Compatible Presses: Lock-N-Load AP and Pro-Jector
- EZ-Ject Compatible: Yes
- Compatible Calibers: 7-30 Waters, 30-30 Win, 25-35 Win, 32 Win Spl, 32-40 Win, 375 Win, 38-55 Win, 219 Zipper, 22 Savage Hi-Power, 30 Herrett, 5.6x52R, 7.5×55 Swiss, 8.15x46R
- Style: Press Type
- Shipping Weight: 0.5375 lb
What’s Included
- One Hornady #2 Lock-N-Load AP shell plate
Frequently Asked Questions
What calibers does the Hornady #2 shell plate fit?
The #2 plate covers a group of rimmed cartridges that share the same rim and base, including 7-30 Waters, 30-30 Winchester, 25-35 Winchester, 32 Winchester Special, 32-40 Winchester, 375 Winchester, 38-55 Winchester, 219 Zipper, 22 Savage Hi-Power, 30 Herrett, 5.6x52R, 7.5×55 Swiss, and 8.15x46R. If your cartridge uses the #2 Hornady shell holder, this is the plate you want.
Will this shell plate work on my Lock-N-Load AP press?
Yes. It fits the Lock-N-Load AP and the older Pro-Jector press, and it's compatible with the EZ-Ject system as well as all prior LNL-AP models. It drops into the shell plate position and is held by the retainer spring.
Is the shell plate the same thing as a shell holder?
Not quite. A shell holder is the small part used on a single-stage press, while the shell plate is the larger rotating disc that holds multiple cases at once on a progressive press. The numbering does line up though, so a #2 shell holder caliber uses the #2 shell plate.
Why would I buy a separate shell plate?
Shell plates are sold separately from the press so you can set up exactly the calibers you load. Keeping a few on hand lets you swap between cartridge families quickly, which is one of the main perks of running a Lock-N-Load AP.




Reviews
There are no reviews yet.