Description
The Hornady Lock-N-Load AP Shell Plate #1 is the steel plate that handles caliber changes on your Lock-N-Load AP or Pro-Jector progressive press. The #1 size is one of the most useful plates in the lineup because it groups together a huge family of common rifle cartridges that share the same case head dimensions, so a single plate pulls a lot of weight on the bench.
What the #1 Shell Plate Actually Fits
This one covers a long list of popular rounds, including 22-250 Remington, 243 Winchester, 6mm Remington, 6mm Creedmoor, 25-06 Remington, 260 Remington, 6.5 Creedmoor, 270 Winchester, 7mm-08 Remington, 280 Remington, 300 Savage, 308 Winchester, 30-06 Springfield and 338 Federal. Any cartridge that uses the same case head as these will run on the #1, which is why it ends up being the go-to plate for a whole lot of reloaders working the standard .473 bolt-face family.
Why the Lock-N-Load AP Shell Plate Runs Smooth
The shell holder mouths are cut with a subtle radius to help cases feed and index without hanging up, which matters a lot when you've got the press moving quick or you're running an LNL case feeder. The retainer spring groove is beveled so the spring stays put when you're dropping cases into the stations, so you're not fighting a spring that wants to walk out of place mid-session.
Fitment Notes for Your Press
This plate is built for the current Lock-N-Load AP presses, both the EZ-Ject and the older wire ejector models, along with the Pro-Jector. If your press still runs the old spring-type case ejector system, you'll want to check whether you need the Hornady auto press retrofit kit before dropping one of these in. Always run the caliber you're loading against Hornady's shell plate chart to confirm the #1 is the right number for your cartridge, since matching the plate to the case head is the key to clean cycling.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 392601
- UPC: 090255926019
- Product Type: Shell Plate
- Shell Plate Size: #1
- Material: Steel
- Representative Caliber: 7mm-08 Remington
- Compatible Presses: Lock-N-Load AP (EZ-Ject and wire ejector), Pro-Jector
- Quantity: 1
- Style: Press Type
What’s Included
- Hornady Lock-N-Load AP Shell Plate #1 (392601)
Frequently Asked Questions
Which calibers does the Hornady Shell Plate #1 fit?
The #1 plate covers the standard .473 case head family, including 22-250 Remington, 243 Winchester, 6mm Creedmoor, 25-06 Remington, 260 Remington, 6.5 Creedmoor, 270 Winchester, 7mm-08 Remington, 280 Remington, 308 Winchester and 30-06 Springfield. Any cartridge sharing that same case head dimension will run on this plate. Check your specific round against Hornady's shell plate chart to be sure.
Will this shell plate work with my Lock-N-Load AP press?
Yes, this plate is designed for the current Lock-N-Load AP presses in both EZ-Ject and wire ejector configurations, as well as the Pro-Jector. If your press still uses the old spring-type case ejector system, you may need the Hornady auto press retrofit kit before this plate will run correctly.
Does the Shell Plate #1 come with the retainer spring and detent parts?
The product is the shell plate itself. The plate features a beveled retainer spring groove designed to keep the spring seated during case insertion, but if you're replacing worn hardware you'll want to confirm you have the matching spring, detent ball and spring for your setup.
Why would I buy a separate shell plate instead of using the one that came with my press?
Shell plates are caliber-specific by case head, so adding the correct plate lets you load cartridges your current plate won't handle. Keeping a #1 on hand covers a large chunk of common rifle rounds, which makes switching calibers a quick swap rather than a headache on the bench.



Reviews
There are no reviews yet.