Description
When a batch of ammo gets loaded with the wrong charge or the wrong bullet, you don't have to write it off. The Hornady Cam-Lock Bullet Collet #9 is the piece that lets your Cam-Lock Bullet Puller grab onto .338 and .358 diameter projectiles, so you can break those rounds down and recover good components instead of tossing them. It's a simple machined steel collet, made in the USA, sized specifically for the #9 slot in Hornady's lineup.
How the #9 Collet Fits Into Your Setup
This is the collet only, not the puller body. It drops into the Hornady Cam-Lock Bullet Puller, which threads into a standard reloading press right where a die would go. You raise the loaded round into the tool, flip the cam-lock lever to clamp the collet around the bullet, then lower the ram to separate the bullet from the case. The whole motion takes a couple of seconds once you've got the feel for it.
Why Reloaders Keep the .338/.358 Collet on the Bench
Compared to a kinetic hammer-style puller, the collet setup is a lot faster when you've got more than a handful of rounds to disassemble. It grips the bullet evenly and pulls it straight out, usually leaving nothing more than a faint mark where the collet made contact. That means you can reuse the bullet, dump and re-weigh the powder, and reseat into the same brass. Folks who shoot calibers like .338 Lapua, .338 Win Mag, .35 Whelen, or .358 Norma reach for this exact collet.
Keep in mind this is intended for rifle cartridges, and each bullet diameter needs its own matching collet. If you load several calibers, it's worth building out your collet collection over time so the puller is ready for whatever lands on your bench.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number (MPN): 392162
- Model: Cam-Lock Bullet Collet #9
- UPC: 090255921625
- Bullet Diameter: .338 / .358 Caliber
- Collet Number: #9
- Material: Machined Steel
- Compatibility: Hornady Cam-Lock Bullet Puller (#050095)
- Intended Use: Rifle cartridges
- Country of Origin: USA
- Quantity: 1 collet
What’s Included
- One (1) Hornady Cam-Lock Bullet Collet #9 for .338/.358 caliber bullets
Frequently Asked Questions
Does the Hornady Cam-Lock Bullet Collet #9 come with the bullet puller?
No, this listing is for the #9 collet only. You'll need the Hornady Cam-Lock Bullet Puller body to use it. The collet drops into that puller, which threads into a standard reloading press.
What calibers does the #9 .338/.358 collet work with?
It's sized for bullets with a .338 and .358 diameter. That covers popular loads like .338 Lapua, .338 Win Mag, .35 Whelen, and .358 Norma Mag. Match the collet to your bullet diameter rather than the cartridge name to be sure.
Will this collet damage my bullets when I pull them?
The collet grips evenly around the bullet, so in most cases you're left with nothing more than a faint mark where it made contact. That's usually cosmetic and lets you reuse the bullet. If you want zero marks, a kinetic impact puller is the alternative, though it's slower on big jobs.
Is the Cam-Lock collet system faster than a kinetic hammer puller?
Yes, especially once you're pulling more than a dozen rounds. You clamp the lever, lower the ram, and the bullet comes right out, no pounding required. It makes quick work of breaking down a batch of ammo that didn't turn out right.




Reviews
There are no reviews yet.