Description
When you need to pull apart .243 or 6mm loads without chewing up the bullet or the brass, the Hornady Cam-Lock Bullet Puller Collet #3 is the piece that does the gripping. This is the caliber-specific collet sized for a 0.243 diameter projectile, and it clamps onto the bullet so the Cam-Lock puller can draw it free of the case. Think of it like a draw collet on a lathe: close it down on the bullet, pull the handle, and the round comes apart. Keep in mind this collet is built for rifle cartridges only.
How the #3 Collet Fits Into Your Setup
The collet itself doesn't do anything on its own. It threads into the Hornady Cam-Lock Bullet Puller (part 050095), which mounts in your press just like a standard die. Since each collet only covers one bullet diameter, the #3 is the one you grab for anything running a 0.243 bullet, which covers .243 Winchester, 6mm Creedmoor, 6mm Remington, and other 6mm rifle rounds sharing that diameter. If you reload more than one caliber, you'll end up with a small collection of these, each labeled by number.
Getting Clean Pulls With the Cam-Lock Collet
The trick with any cam-lock collet is setup. Take your time dialing in the clamp pressure so you get a firm bite without marring the jacket. Done right, you can salvage components from a bad load, correct a charge, or break down surplus ammo and reuse the bullets. Folks who reload regularly tend to keep one of these on the bench because it beats the kinetic hammer-style pullers for speed and for doing several rounds of the same caliber in a row.
Machined from metal and made in the USA, the #3 is a simple, no-nonsense tool that holds up to steady use. Pair it with the Cam-Lock puller and you've got one of the fastest ways to take a cartridge apart without wasting good brass or bullets.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 392156
- Model Number: 392156
- Collet Size: #3
- UPC: 090255921564
- Caliber/Gauge: .243/6 mm (.243)
- Bullet Diameter: 0.243"
- Material: Metal
- Compatibility: Hornady Cam-Lock Bullet Puller (050095)
- Intended Use: Rifle cartridges only
- Country of Origin: USA
- Quantity: 1 collet
What’s Included
- One Hornady Cam-Lock Bullet Puller Collet #3 (.243/6mm)
Frequently Asked Questions
Does the #3 collet come with the Cam-Lock Bullet Puller?
No. The 392156 is just the caliber-specific collet for 0.243 diameter bullets. The Cam-Lock Bullet Puller (part 050095) is sold separately, and this collet threads into it.
What calibers will the Hornady #3 collet work with?
It's sized for a 0.243 bullet diameter, so it fits .243 Winchester, 6mm Creedmoor, 6mm Remington, and other 6mm rifle cartridges that use that same bullet size. If your projectile measures 0.243, this is the right collet.
Can I use this collet to pull pistol bullets?
No. The Cam-Lock system and its collets are intended for rifle cartridges only. For handgun rounds you'll want to look at a different pulling method.
Will pulling a bullet damage it with the Cam-Lock collet?
When set up properly, it grips firmly without marring the bullet, so components can be reused. The key is taking your time dialing in the clamp pressure. Go slow during setup and you'll get clean, reusable pulls.




Reviews
There are no reviews yet.