Description
If you're running the Hornady Neck Turn Tool and working with 6mm or .243 brass, this is the mandrel that makes it all line up. The 391913 is a .2395 inch steel arbor that threads into the neck turn body and supports the inside of your case neck while the cutter shaves the outside to a consistent thickness. Because neck turning is a tight-tolerance job, you need the correct caliber mandrel to hold the case true, and that's exactly what this one does for 6mm cartridges.
What the 6mm Neck Turn Mandrel Does
When you slide a case neck over this mandrel, it keeps the brass centered and steady so the cutting bit removes material evenly all the way around. That even cut is what gives you uniform neck wall thickness and better bullet-to-bore alignment, which is the whole point of turning necks in the first place. It's a straightforward part with an important job, and skipping it or using the wrong size defeats the purpose of the tool.
Fitting the 391913 Into Your Reloading Setup
This mandrel is designed to work only with the Hornady Neck Turn Tool, which is sold separately. The full tool ships with mandrels for 22 cal, 6mm, 6.5mm, and 30 cal, so this 6mm version is a handy standalone buy if you've lost one, worn one out, or picked up a used tool that's missing pieces. It's a genuine Hornady component machined from steel and made in the United States, so it matches the rest of the Hornady case prep tooling right out of the package.
For precision loaders chasing tight groups, consistent neck thickness is one of those small prep steps that pays off at the target. Pair this mandrel with a little case lube or cutting fluid during turning and you'll get a smoother cut and a longer-lasting bit.
Key Specifications
- Manufacturer: Hornady
- Manufacturer Part Number: 391913
- UPC: 090255919134
- Caliber: 6mm / .243
- Mandrel Size: 0.2395 in
- Material: Steel
- Product Type: Neck Turn Tool Mandrel
- Compatibility: Hornady Neck Turn Tool
- Country of Origin: United States
What’s Included
- Hornady 6mm neck turn mandrel (391913)
Frequently Asked Questions
What does the Hornady 6mm neck turn mandrel do?
The mandrel supports the inside of your case neck and keeps the brass centered while the cutting bit trims the outside. That keeps material removal even all the way around, giving you consistent neck wall thickness. It's the alignment piece that makes accurate neck turning possible.
Does this mandrel work on its own, or do I need the Hornady Neck Turn Tool?
This mandrel is designed specifically for the Hornady Neck Turn Tool, which is sold separately. On its own it won't turn necks, since it's the alignment arbor that fits into the tool body. If you already own the tool, this is the correct 6mm/.243 mandrel to drop right in.
What size is the 391913 mandrel?
It measures .2395 inch in diameter and is sized for 6mm and .243 caliber cases. The precise diameter is what lets the case neck ride true during the cut. Using the matched mandrel for your caliber is key to getting uniform results.
Is this a genuine Hornady part?
Yes, this is a factory Hornady component (part number 391913) machined from steel and made in the United States. It matches the mandrels that ship with the complete Hornady Neck Turn Tool kit. That makes it a solid replacement if you've misplaced one or bought a used tool missing pieces.




Reviews
There are no reviews yet.