0
0

Hornady Mandrel Neck Turn Tool .22 Cal (.2210) Stainless 391910

UPC: 090255919103

$12.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run a Hornady Neck Turning Tool and work with .22 caliber brass, this is the mandrel that makes the whole setup work. It's the .2210 size (part 391910), machined from stainless steel to hold tight tolerances and keep your case necks aligned while the cutter does its job. Think of it as the backbone the case rides on so the cutting bit removes a perfectly even ring of material all the way around the neck.

What the .22 Neck Turn Mandrel Actually Does

Neck turning is all about uniformity, and uniformity starts with alignment. This mandrel slides inside the case neck and gives the brass a true centerline to spin on, so you shave the outside of the neck to a consistent thickness instead of chasing runout. That even neck wall means better bullet grip, cleaner concentricity, and the kind of tight groups that make the extra bench time worth it. The .2210 diameter is matched to .22 caliber cases, so you're set up right from the first pass.

Why Handloaders Reach for the Hornady Neck Turn Mandrel

The stainless construction holds up to repeated use and the cutting fluid or case lube you'll want to run during the process. It threads into the back side of the neck turn body and locks in place, giving you a stable platform whether you're turning by hand or spinning cases with a drill. Because it's caliber-specific, each size does one job and does it well.

One thing worth knowing up front: this is the mandrel only. The Hornady Neck Turning Tool is sold separately, and the .22, 6mm, 6.5mm, and 30 cal mandrels ship included with that tool. If you're working a caliber outside those four, or you simply need a fresh one, this standalone .22 mandrel is exactly what fills the gap on your bench.

Key Specifications

  • Manufacturer: Hornady
  • Manufacturer Part Number: 391910
  • UPC: 090255919103
  • Caliber: .22 Caliber
  • Mandrel Diameter: .2210"
  • Material: Stainless Steel
  • Finish: Silver
  • Quantity: 1 Mandrel
  • Fits: Hornady Neck Turning Tool (sold separately)
  • Shipping Weight: 0.05 lbs

What’s Included

  • One (1) Hornady .22 Caliber Neck Turn Mandrel (.2210)

Frequently Asked Questions

Does this .22 neck turn mandrel come with the Hornady Neck Turning Tool?

No, this is the standalone .2210 mandrel only. The Hornady Neck Turning Tool is sold separately. Keep in mind the tool itself already ships with the .22, 6mm, 6.5mm, and 30 cal mandrels included, so this is handy as a replacement or spare.

What size is the Hornady .22 neck turn mandrel?

It's sized at .2210 to match .22 caliber cases. That diameter gives the brass a true centerline inside the neck so the cutter trims an even thickness all the way around.

What is this mandrel actually used for?

It aligns your cases inside the Hornady Neck Turning Tool while you turn the outside of the case necks. Proper alignment is what gives you consistent neck wall thickness, which leads to better bullet grip and tighter concentricity. Running a little case lube or cutting fluid during the process makes for a cleaner cut.

Can I use it with a drill?

Yes. The Hornady Neck Turning Tool is designed to accept a drill (not included) to speed up the process, and this mandrel holds the case steady while you spin it. Turning by hand works fine too if you prefer the slower, controlled approach.

Additional information

UPC

090255919103

Manufacturer

Manufacturer Part Number

391910

Caliber/Gauge

.22 LR

Shipping Weight

0.05

Reviews

There are no reviews yet.

Be the first to review “Hornady Mandrel Neck Turn Tool .22 Cal (.2210) Stainless 391910”